http://www.ousob.com --- Legacy Redefined OuSob - File: /wwwroot/clipx/usr/include/linux/audit.h

/* audit.h -- Auditing support * * Copyright 2003-2004 Red Hat Inc., Durham, North Carolina. * All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Written by Rickard E. (Rik) Faith <faith@redhat.com> * */ #ifndef _LINUX_AUDIT_H_ #define _LINUX_AUDIT_H_ #include <elf.h> /* The netlink messages for the audit system is divided into blocks: * 1000 - 1099 are for commanding the audit system * 1100 - 1199 user space trusted application messages * 1200 - 1299 messages internal to the audit daemon * 1300 - 1399 audit event messages * 1400 - 1499 SE Linux use * 1500 - 1999 future use * 2000 is for otherwise unclassified kernel audit messages * * Messages from 1000-1199 are bi-directional. 1200-1299 are exclusively user * space. Anything over that is kernel --> user space communication. */ #define AUDIT_GET 1000 /* Get status */ #define AUDIT_SET 1001 /* Set status (enable/disable/auditd) */ #define AUDIT_LIST 1002 /* List syscall filtering rules */ #define AUDIT_ADD 1003 /* Add syscall filtering rule */ #define AUDIT_DEL 1004 /* Delete syscall filtering rule */ #define AUDIT_USER 1005 /* Message from userspace -- deprecated */ #define AUDIT_LOGIN 1006 /* Define the login id and information */ #define AUDIT_WATCH_INS 1007 /* Insert file/dir watch entry */ #define AUDIT_WATCH_REM 1008 /* Remove file/dir watch entry */ #define AUDIT_WATCH_LIST 1009 /* List all file/dir watches */ #define AUDIT_SIGNAL_INFO 1010 /* Get info about sender of signal to auditd */ #define AUDIT_FIRST_USER_MSG 1100 /* Userspace messages mostly uninteresting to kernel */ #define AUDIT_USER_AVC 1107 /* We filter this differently */ #define AUDIT_LAST_USER_MSG 1199 #define AUDIT_DAEMON_START 1200 /* Daemon startup record */ #define AUDIT_DAEMON_END 1201 /* Daemon normal stop record */ #define AUDIT_DAEMON_ABORT 1202 /* Daemon error stop record */ #define AUDIT_DAEMON_CONFIG 1203 /* Daemon config change */ #define AUDIT_SYSCALL 1300 /* Syscall event */ #define AUDIT_FS_WATCH 1301 /* Filesystem watch event */ #define AUDIT_PATH 1302 /* Filename path information */ #define AUDIT_IPC 1303 /* IPC record */ #define AUDIT_SOCKETCALL 1304 /* sys_socketcall arguments */ #define AUDIT_CONFIG_CHANGE 1305 /* Audit system configuration change */ #define AUDIT_SOCKADDR 1306 /* sockaddr copied as syscall arg */ #define AUDIT_CWD 1307 /* Current working directory */ #define AUDIT_AVC 1400 /* SE Linux avc denial or grant */ #define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */ #define AUDIT_AVC_PATH 1402 /* dentry, vfsmount pair from avc */ #define AUDIT_KERNEL 2000 /* Asynchronous audit record. NOT A REQUEST. */ /* Rule flags */ #define AUDIT_FILTER_USER 0x00 /* Apply rule to user-generated messages */ #define AUDIT_FILTER_TASK 0x01 /* Apply rule at task creation (not syscall) */ #define AUDIT_FILTER_ENTRY 0x02 /* Apply rule at syscall entry */ #define AUDIT_FILTER_WATCH 0x03 /* Apply rule to file system watches */ #define AUDIT_FILTER_EXIT 0x04 /* Apply rule at syscall exit */ #define AUDIT_NR_FILTERS 5 #define AUDIT_FILTER_PREPEND 0x10 /* Prepend to front of list */ /* Rule actions */ #define AUDIT_NEVER 0 /* Do not build context if rule matches */ #define AUDIT_POSSIBLE 1 /* Build context if rule matches */ #define AUDIT_ALWAYS 2 /* Generate audit record if rule matches */ /* Rule structure sizes -- if these change, different AUDIT_ADD and * AUDIT_LIST commands must be implemented. */ #define AUDIT_MAX_FIELDS 64 #define AUDIT_BITMASK_SIZE 64 #define AUDIT_WORD(nr) ((uint32_t)((nr)/32)) #define AUDIT_BIT(nr) (1 << ((nr) - AUDIT_WORD(nr)*32)) /* Rule fields */ /* These are useful when checking the * task structure at task creation time * (AUDIT_PER_TASK). */ #define AUDIT_PID 0 #define AUDIT_UID 1 #define AUDIT_EUID 2 #define AUDIT_SUID 3 #define AUDIT_FSUID 4 #define AUDIT_GID 5 #define AUDIT_EGID 6 #define AUDIT_SGID 7 #define AUDIT_FSGID 8 #define AUDIT_LOGINUID 9 #define AUDIT_PERS 10 #define AUDIT_ARCH 11 /* These are ONLY useful when checking * at syscall exit time (AUDIT_AT_EXIT). */ #define AUDIT_DEVMAJOR 100 #define AUDIT_DEVMINOR 101 #define AUDIT_INODE 102 #define AUDIT_EXIT 103 #define AUDIT_SUCCESS 104 /* exit >= 0; value ignored */ #define AUDIT_ARG0 200 #define AUDIT_ARG1 (AUDIT_ARG0+1) #define AUDIT_ARG2 (AUDIT_ARG0+2) #define AUDIT_ARG3 (AUDIT_ARG0+3) #define AUDIT_NEGATE 0x80000000 /* Status symbols */ /* Mask values */ #define AUDIT_STATUS_ENABLED 0x0001 #define AUDIT_STATUS_FAILURE 0x0002 #define AUDIT_STATUS_PID 0x0004 #define AUDIT_STATUS_RATE_LIMIT 0x0008 #define AUDIT_STATUS_BACKLOG_LIMIT 0x0010 /* Failure-to-log actions */ #define AUDIT_FAIL_SILENT 0 #define AUDIT_FAIL_PRINTK 1 #define AUDIT_FAIL_PANIC 2 /* distinguish syscall tables */ #define __AUDIT_ARCH_64BIT 0x80000000 #define __AUDIT_ARCH_LE 0x40000000 #define AUDIT_ARCH_ALPHA (EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_ARCH_ARM (EM_ARM|__AUDIT_ARCH_LE) #define AUDIT_ARCH_ARMEB (EM_ARM) #define AUDIT_ARCH_CRIS (EM_CRIS|__AUDIT_ARCH_LE) #define AUDIT_ARCH_FRV (EM_FRV) #define AUDIT_ARCH_H8300 (EM_H8_300) #define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE) #define AUDIT_ARCH_IA64 (EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_ARCH_M32R (EM_M32R) #define AUDIT_ARCH_M68K (EM_68K) #define AUDIT_ARCH_MIPS (EM_MIPS) #define AUDIT_ARCH_MIPSEL (EM_MIPS|__AUDIT_ARCH_LE) #define AUDIT_ARCH_MIPS64 (EM_MIPS|__AUDIT_ARCH_64BIT) #define AUDIT_ARCH_MIPSEL64 (EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_ARCH_PARISC (EM_PARISC) #define AUDIT_ARCH_PARISC64 (EM_PARISC|__AUDIT_ARCH_64BIT) #define AUDIT_ARCH_PPC (EM_PPC) #define AUDIT_ARCH_PPC64 (EM_PPC64|__AUDIT_ARCH_64BIT) #define AUDIT_ARCH_S390 (EM_S390) #define AUDIT_ARCH_S390X (EM_S390|__AUDIT_ARCH_64BIT) #define AUDIT_ARCH_SH (EM_SH) #define AUDIT_ARCH_SHEL (EM_SH|__AUDIT_ARCH_LE) #define AUDIT_ARCH_SH64 (EM_SH|__AUDIT_ARCH_64BIT) #define AUDIT_ARCH_SHEL64 (EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_ARCH_SPARC (EM_SPARC) #define AUDIT_ARCH_SPARC64 (EM_SPARCV9|__AUDIT_ARCH_64BIT) #define AUDIT_ARCH_V850 (EM_V850|__AUDIT_ARCH_LE) #define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) struct audit_status { uint32_t mask; /* Bit mask for valid entries */ uint32_t enabled; /* 1 = enabled, 0 = disabled */ uint32_t failure; /* Failure-to-log action */ uint32_t pid; /* pid of auditd process */ uint32_t rate_limit; /* messages rate limit (per second) */ uint32_t backlog_limit; /* waiting messages limit */ uint32_t lost; /* messages lost */ uint32_t backlog; /* messages waiting in queue */ }; struct audit_rule { /* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */ uint32_t flags; /* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */ uint32_t action; /* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */ uint32_t field_count; uint32_t mask[AUDIT_BITMASK_SIZE]; uint32_t fields[AUDIT_MAX_FIELDS]; uint32_t values[AUDIT_MAX_FIELDS]; }; #ifdef __KERNEL__ struct audit_sig_info { uid_t uid; pid_t pid; }; struct audit_buffer; struct audit_context; struct inode; struct netlink_skb_parms; #define AUDITSC_INVALID 0 #define AUDITSC_SUCCESS 1 #define AUDITSC_FAILURE 2 #define AUDITSC_RESULT(x) ( ((long)(x))<0?AUDITSC_FAILURE:AUDITSC_SUCCESS ) #ifdef CONFIG_AUDITSYSCALL /* These are defined in auditsc.c */ /* Public API */ extern int audit_alloc(struct task_struct *task); extern void audit_free(struct task_struct *task); extern void audit_syscall_entry(struct task_struct *task, int arch, int major, unsigned long a0, unsigned long a1, unsigned long a2, unsigned long a3); extern void audit_syscall_exit(struct task_struct *task, int failed, long return_code); extern void audit_getname(const char *name); extern void audit_putname(const char *name); extern void audit_inode(const char *name, const struct inode *inode, unsigned flags); /* Private API (for audit.c only) */ extern int audit_receive_filter(int type, int pid, int uid, int seq, void *data, uid_t loginuid); extern unsigned int audit_serial(void); extern void auditsc_get_stamp(struct audit_context *ctx, struct timespec *t, unsigned int *serial); extern int audit_set_loginuid(struct task_struct *task, uid_t loginuid); extern uid_t audit_get_loginuid(struct audit_context *ctx); extern int audit_ipc_perms(unsigned long qbytes, uid_t uid, gid_t gid, mode_t mode); extern int audit_socketcall(int nargs, unsigned long *args); extern int audit_sockaddr(int len, void *addr); extern int audit_avc_path(struct dentry *dentry, struct vfsmount *mnt); extern void audit_signal_info(int sig, struct task_struct *t); extern int audit_filter_user(struct netlink_skb_parms *cb, int type); #else #define audit_alloc(t) ({ 0; }) #define audit_free(t) do { ; } while (0) #define audit_syscall_entry(t,ta,a,b,c,d,e) do { ; } while (0) #define audit_syscall_exit(t,f,r) do { ; } while (0) #define audit_getname(n) do { ; } while (0) #define audit_putname(n) do { ; } while (0) #define audit_inode(n,i,f) do { ; } while (0) #define audit_receive_filter(t,p,u,s,d,l) ({ -EOPNOTSUPP; }) #define auditsc_get_stamp(c,t,s) do { BUG(); } while (0) #define audit_get_loginuid(c) ({ -1; }) #define audit_ipc_perms(q,u,g,m) ({ 0; }) #define audit_socketcall(n,a) ({ 0; }) #define audit_sockaddr(len, addr) ({ 0; }) #define audit_avc_path(dentry, mnt) ({ 0; }) #define audit_signal_info(s,t) do { ; } while (0) #define audit_filter_user(cb,t) ({ 1; }) #endif #ifdef CONFIG_AUDIT /* These are defined in audit.c */ /* Public API */ extern void audit_log(struct audit_context *ctx, gfp_t gfp_mask, int type, const char *fmt, ...) __attribute__((format(printf,4,5))); extern struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask, int type); extern void audit_log_format(struct audit_buffer *ab, const char *fmt, ...) __attribute__((format(printf,2,3))); extern void audit_log_end(struct audit_buffer *ab); extern void audit_log_hex(struct audit_buffer *ab, const unsigned char *buf, size_t len); extern void audit_log_untrustedstring(struct audit_buffer *ab, const char *string); extern void audit_log_d_path(struct audit_buffer *ab, const char *prefix, struct dentry *dentry, struct vfsmount *vfsmnt); /* Private API (for auditsc.c only) */ extern void audit_send_reply(int pid, int seq, int type, int done, int multi, void *payload, int size); extern void audit_log_lost(const char *message); extern struct semaphore audit_netlink_sem; #else #define audit_log(c,g,t,f,...) do { ; } while (0) #define audit_log_start(c,g,t) ({ NULL; }) #define audit_log_vformat(b,f,a) do { ; } while (0) #define audit_log_format(b,f,...) do { ; } while (0) #define audit_log_end(b) do { ; } while (0) #define audit_log_hex(a,b,l) do { ; } while (0) #define audit_log_untrustedstring(a,s) do { ; } while (0) #define audit_log_d_path(b,p,d,v) do { ; } while (0) #endif #endif #endif