http://www.ousob.com --- Legacy Redefined OuSob - File: /wwwroot/clipx/usr/include/linux/usb_isp116x.h

/* * Board initialization code should put one of these into dev->platform_data * and place the isp116x onto platform_bus. */ struct isp116x_platform_data { /* Enable internal resistors on downstream ports */ unsigned sel15Kres:1; /* On-chip overcurrent detection */ unsigned oc_enable:1; /* INT output polarity */ unsigned int_act_high:1; /* INT edge or level triggered */ unsigned int_edge_triggered:1; /* Enable wakeup by devices on usb bus (e.g. wakeup by attachment/detachment or by device activity such as moving a mouse). When chosen, this option prevents stopping internal clock, increasing thereby power consumption in suspended state. */ unsigned remote_wakeup_enable:1; /* Inter-io delay (ns). The chip is picky about access timings; it expects at least: 150ns delay between consecutive accesses to DATA_REG, 300ns delay between access to ADDR_REG and DATA_REG OE, WE MUST NOT be changed during these intervals */ void (*delay) (struct device * dev, int delay); };