http://www.ousob.com --- Legacy Redefined OuSob - File: /wwwroot/clipx/usr/include/ssl/ssl.h

/* ssl/ssl.h */ /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) * All rights reserved. * * This package is an SSL implementation written * by Eric Young (eay@cryptsoft.com). * The implementation was written so as to conform with Netscapes SSL. * * This library is free for commercial and non-commercial use as long as * the following conditions are aheared to. The following conditions * apply to all code found in this distribution, be it the RC4, RSA, * lhash, DES, etc., code; not just the SSL code. The SSL documentation * included with this distribution is covered by the same copyright terms * except that the holder is Tim Hudson (tjh@cryptsoft.com). * * Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * "This product includes cryptographic software written by * Eric Young (eay@cryptsoft.com)" * The word 'cryptographic' can be left out if the rouines from the library * being used are not cryptographic related :-). * 4. If you include any Windows specific code (or a derivative thereof) from * the apps directory (application code) you must include an acknowledgement: * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" * * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * The licence and distribution terms for any publically available version or * derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.] */ /* ==================================================================== * Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * openssl-core@openssl.org. * * 5. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.openssl.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft.com). This product includes software written by Tim * Hudson (tjh@cryptsoft.com). * */ /* ==================================================================== * Copyright (c) 1998-2002 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * openssl-core@openssl.org. * * 5. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.openssl.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft.com). This product includes software written by Tim * Hudson (tjh@cryptsoft.com). * */ /* ==================================================================== * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. * ECC cipher suite support in OpenSSL originally developed by * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project. */ #ifndef HEADER_SSL_H #define HEADER_SSL_H #include <openssl/e_os2.h> #ifndef OPENSSL_NO_COMP #include <openssl/comp.h> #endif #ifndef OPENSSL_NO_BIO #include <openssl/bio.h> #endif #ifndef OPENSSL_NO_DEPRECATED #ifndef OPENSSL_NO_X509 #include <openssl/x509.h> #endif #include <openssl/crypto.h> #include <openssl/lhash.h> #include <openssl/buffer.h> #endif #include <openssl/pem.h> #include <openssl/kssl.h> #include <openssl/safestack.h> #include <openssl/symhacks.h> #ifdef __cplusplus extern "C" { #endif /* SSLeay version number for ASN.1 encoding of the session information */ /* Version 0 - initial version * Version 1 - added the optional peer certificate */ #define SSL_SESSION_ASN1_VERSION 0x0001 /* text strings for the ciphers */ #define SSL_TXT_NULL_WITH_MD5 SSL2_TXT_NULL_WITH_MD5 #define SSL_TXT_RC4_128_WITH_MD5 SSL2_TXT_RC4_128_WITH_MD5 #define SSL_TXT_RC4_128_EXPORT40_WITH_MD5 SSL2_TXT_RC4_128_EXPORT40_WITH_MD5 #define SSL_TXT_RC2_128_CBC_WITH_MD5 SSL2_TXT_RC2_128_CBC_WITH_MD5 #define SSL_TXT_RC2_128_CBC_EXPORT40_WITH_MD5 SSL2_TXT_RC2_128_CBC_EXPORT40_WITH_MD5 #define SSL_TXT_IDEA_128_CBC_WITH_MD5 SSL2_TXT_IDEA_128_CBC_WITH_MD5 #define SSL_TXT_DES_64_CBC_WITH_MD5 SSL2_TXT_DES_64_CBC_WITH_MD5 #define SSL_TXT_DES_64_CBC_WITH_SHA SSL2_TXT_DES_64_CBC_WITH_SHA #define SSL_TXT_DES_192_EDE3_CBC_WITH_MD5 SSL2_TXT_DES_192_EDE3_CBC_WITH_MD5 #define SSL_TXT_DES_192_EDE3_CBC_WITH_SHA SSL2_TXT_DES_192_EDE3_CBC_WITH_SHA /* VRS Additional Kerberos5 entries */ #define SSL_TXT_KRB5_DES_64_CBC_SHA SSL3_TXT_KRB5_DES_64_CBC_SHA #define SSL_TXT_KRB5_DES_192_CBC3_SHA SSL3_TXT_KRB5_DES_192_CBC3_SHA #define SSL_TXT_KRB5_RC4_128_SHA SSL3_TXT_KRB5_RC4_128_SHA #define SSL_TXT_KRB5_IDEA_128_CBC_SHA SSL3_TXT_KRB5_IDEA_128_CBC_SHA #define SSL_TXT_KRB5_DES_64_CBC_MD5 SSL3_TXT_KRB5_DES_64_CBC_MD5 #define SSL_TXT_KRB5_DES_192_CBC3_MD5 SSL3_TXT_KRB5_DES_192_CBC3_MD5 #define SSL_TXT_KRB5_RC4_128_MD5 SSL3_TXT_KRB5_RC4_128_MD5 #define SSL_TXT_KRB5_IDEA_128_CBC_MD5 SSL3_TXT_KRB5_IDEA_128_CBC_MD5 #define SSL_TXT_KRB5_DES_40_CBC_SHA SSL3_TXT_KRB5_DES_40_CBC_SHA #define SSL_TXT_KRB5_RC2_40_CBC_SHA SSL3_TXT_KRB5_RC2_40_CBC_SHA #define SSL_TXT_KRB5_RC4_40_SHA SSL3_TXT_KRB5_RC4_40_SHA #define SSL_TXT_KRB5_DES_40_CBC_MD5 SSL3_TXT_KRB5_DES_40_CBC_MD5 #define SSL_TXT_KRB5_RC2_40_CBC_MD5 SSL3_TXT_KRB5_RC2_40_CBC_MD5 #define SSL_TXT_KRB5_RC4_40_MD5 SSL3_TXT_KRB5_RC4_40_MD5 #define SSL_TXT_KRB5_DES_40_CBC_SHA SSL3_TXT_KRB5_DES_40_CBC_SHA #define SSL_TXT_KRB5_DES_40_CBC_MD5 SSL3_TXT_KRB5_DES_40_CBC_MD5 #define SSL_TXT_KRB5_DES_64_CBC_SHA SSL3_TXT_KRB5_DES_64_CBC_SHA #define SSL_TXT_KRB5_DES_64_CBC_MD5 SSL3_TXT_KRB5_DES_64_CBC_MD5 #define SSL_TXT_KRB5_DES_192_CBC3_SHA SSL3_TXT_KRB5_DES_192_CBC3_SHA #define SSL_TXT_KRB5_DES_192_CBC3_MD5 SSL3_TXT_KRB5_DES_192_CBC3_MD5 #define SSL_MAX_KRB5_PRINCIPAL_LENGTH 256 #define SSL_MAX_SSL_SESSION_ID_LENGTH 32 #define SSL_MAX_SID_CTX_LENGTH 32 #define SSL_MIN_RSA_MODULUS_LENGTH_IN_BYTES (512/8) #define SSL_MAX_KEY_ARG_LENGTH 8 #define SSL_MAX_MASTER_KEY_LENGTH 48 /* These are used to specify which ciphers to use and not to use */ #define SSL_TXT_LOW "LOW" #define SSL_TXT_MEDIUM "MEDIUM" #define SSL_TXT_HIGH "HIGH" #define SSL_TXT_kFZA "kFZA" #define SSL_TXT_aFZA "aFZA" #define SSL_TXT_eFZA "eFZA" #define SSL_TXT_FZA "FZA" #define SSL_TXT_aNULL "aNULL" #define SSL_TXT_eNULL "eNULL" #define SSL_TXT_NULL "NULL" #define SSL_TXT_kKRB5 "kKRB5" #define SSL_TXT_aKRB5 "aKRB5" #define SSL_TXT_KRB5 "KRB5" #define SSL_TXT_kRSA "kRSA" #define SSL_TXT_kDHr "kDHr" #define SSL_TXT_kDHd "kDHd" #define SSL_TXT_kEDH "kEDH" #define SSL_TXT_aRSA "aRSA" #define SSL_TXT_aDSS "aDSS" #define SSL_TXT_aDH "aDH" #define SSL_TXT_DSS "DSS" #define SSL_TXT_DH "DH" #define SSL_TXT_EDH "EDH" #define SSL_TXT_ADH "ADH" #define SSL_TXT_RSA "RSA" #define SSL_TXT_DES "DES" #define SSL_TXT_3DES "3DES" #define SSL_TXT_RC4 "RC4" #define SSL_TXT_RC2 "RC2" #define SSL_TXT_IDEA "IDEA" #define SSL_TXT_AES "AES" #define SSL_TXT_MD5 "MD5" #define SSL_TXT_SHA1 "SHA1" #define SSL_TXT_SHA "SHA" #define SSL_TXT_EXP "EXP" #define SSL_TXT_EXPORT "EXPORT" #define SSL_TXT_EXP40 "EXPORT40" #define SSL_TXT_EXP56 "EXPORT56" #define SSL_TXT_SSLV2 "SSLv2" #define SSL_TXT_SSLV3 "SSLv3" #define SSL_TXT_TLSV1 "TLSv1" #define SSL_TXT_ALL "ALL" #define SSL_TXT_ECC "ECCdraft" /* ECC ciphersuites are not yet official */ /* * COMPLEMENTOF* definitions. These identifiers are used to (de-select) * ciphers normally not being used. * Example: "RC4" will activate all ciphers using RC4 including ciphers * without authentication, which would normally disabled by DEFAULT (due * the "!ADH" being part of default). Therefore "RC4:!COMPLEMENTOFDEFAULT" * will make sure that it is also disabled in the specific selection. * COMPLEMENTOF* identifiers are portable between version, as adjustments * to the default cipher setup will also be included here. * * COMPLEMENTOFDEFAULT does not experience the same special treatment that * DEFAULT gets, as only selection is being done and no sorting as needed * for DEFAULT. */ #define SSL_TXT_CMPALL "COMPLEMENTOFALL" #define SSL_TXT_CMPDEF "COMPLEMENTOFDEFAULT" /* The following cipher list is used by default. * It also is substituted when an application-defined cipher list string * starts with 'DEFAULT'. */ #define SSL_DEFAULT_CIPHER_LIST "ALL:!ADH:+RC4:@STRENGTH" /* low priority for RC4 */ /* Used in SSL_set_shutdown()/SSL_get_shutdown(); */ #define SSL_SENT_SHUTDOWN 1 #define SSL_RECEIVED_SHUTDOWN 2 #ifdef __cplusplus } #endif #ifdef __cplusplus extern "C" { #endif #if (defined(OPENSSL_NO_RSA) || defined(OPENSSL_NO_MD5)) && !defined(OPENSSL_NO_SSL2) #define OPENSSL_NO_SSL2 #endif #define SSL_FILETYPE_ASN1 X509_FILETYPE_ASN1 #define SSL_FILETYPE_PEM X509_FILETYPE_PEM /* This is needed to stop compilers complaining about the * 'struct ssl_st *' function parameters used to prototype callbacks * in SSL_CTX. */ typedef struct ssl_st *ssl_crock_st; /* used to hold info on the particular ciphers used */ typedef struct ssl_cipher_st { int valid; const char *name; /* text name */ unsigned long id; /* id, 4 bytes, first is version */ unsigned long algorithms; /* what ciphers are used */ unsigned long algo_strength; /* strength and export flags */ unsigned long algorithm2; /* Extra flags */ int strength_bits; /* Number of bits really used */ int alg_bits; /* Number of bits for algorithm */ unsigned long mask; /* used for matching */ unsigned long mask_strength; /* also used for matching */ } SSL_CIPHER; DECLARE_STACK_OF(SSL_CIPHER) typedef struct ssl_st SSL; typedef struct ssl_ctx_st SSL_CTX; /* Used to hold functions for SSLv2 or SSLv3/TLSv1 functions */ typedef struct ssl_method_st { int version; int (*ssl_new)(SSL *s); void (*ssl_clear)(SSL *s); void (*ssl_free)(SSL *s); int (*ssl_accept)(SSL *s); int (*ssl_connect)(SSL *s); int (*ssl_read)(SSL *s,void *buf,int len); int (*ssl_peek)(SSL *s,void *buf,int len); int (*ssl_write)(SSL *s,const void *buf,int len); int (*ssl_shutdown)(SSL *s); int (*ssl_renegotiate)(SSL *s); int (*ssl_renegotiate_check)(SSL *s); long (*ssl_get_message)(SSL *s, int st1, int stn, int mt, long max, int *ok); int (*ssl_read_bytes)(SSL *s, int type, unsigned char *buf, int len, int peek); int (*ssl_write_bytes)(SSL *s, int type, const void *buf_, int len); int (*ssl_dispatch_alert)(SSL *s); long (*ssl_ctrl)(SSL *s,int cmd,long larg,void *parg); long (*ssl_ctx_ctrl)(SSL_CTX *ctx,int cmd,long larg,void *parg); SSL_CIPHER *(*get_cipher_by_char)(const unsigned char *ptr); int (*put_cipher_by_char)(const SSL_CIPHER *cipher,unsigned char *ptr); int (*ssl_pending)(const SSL *s); int (*num_ciphers)(void); SSL_CIPHER *(*get_cipher)(unsigned ncipher); struct ssl_method_st *(*get_ssl_method)(int version); long (*get_timeout)(void); struct ssl3_enc_method *ssl3_enc; /* Extra SSLv3/TLS stuff */ int (*ssl_version)(void); long (*ssl_callback_ctrl)(SSL *s, int cb_id, void (*fp)(void)); long (*ssl_ctx_callback_ctrl)(SSL_CTX *s, int cb_id, void (*fp)(void)); } SSL_METHOD; /* Lets make this into an ASN.1 type structure as follows * SSL_SESSION_ID ::= SEQUENCE { * version INTEGER, -- structure version number * SSLversion INTEGER, -- SSL version number * Cipher OCTET_STRING, -- the 3 byte cipher ID * Session_ID OCTET_STRING, -- the Session ID * Master_key OCTET_STRING, -- the master key * KRB5_principal OCTET_STRING -- optional Kerberos principal * Key_Arg [ 0 ] IMPLICIT OCTET_STRING, -- the optional Key argument * Time [ 1 ] EXPLICIT INTEGER, -- optional Start Time * Timeout [ 2 ] EXPLICIT INTEGER, -- optional Timeout ins seconds * Peer [ 3 ] EXPLICIT X509, -- optional Peer Certificate * Session_ID_context [ 4 ] EXPLICIT OCTET_STRING, -- the Session ID context * Verify_result [ 5 ] EXPLICIT INTEGER -- X509_V_... code for `Peer' * Compression [6] IMPLICIT ASN1_OBJECT -- compression OID XXXXX * } * Look in ssl/ssl_asn1.c for more details * I'm using EXPLICIT tags so I can read the damn things using asn1parse :-). */ typedef struct ssl_session_st { int ssl_version; /* what ssl version session info is * being kept in here? */ /* only really used in SSLv2 */ unsigned int key_arg_length; unsigned char key_arg[SSL_MAX_KEY_ARG_LENGTH]; int master_key_length; unsigned char master_key[SSL_MAX_MASTER_KEY_LENGTH]; /* session_id - valid? */ unsigned int session_id_length; unsigned char session_id[SSL_MAX_SSL_SESSION_ID_LENGTH]; /* this is used to determine whether the session is being reused in * the appropriate context. It is up to the application to set this, * via SSL_new */ unsigned int sid_ctx_length; unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; #ifndef OPENSSL_NO_KRB5 unsigned int krb5_client_princ_len; unsigned char krb5_client_princ[SSL_MAX_KRB5_PRINCIPAL_LENGTH]; #endif /* OPENSSL_NO_KRB5 */ int not_resumable; /* The cert is the certificate used to establish this connection */ struct sess_cert_st /* SESS_CERT */ *sess_cert; /* This is the cert for the other end. * On clients, it will be the same as sess_cert->peer_key->x509 * (the latter is not enough as sess_cert is not retained * in the external representation of sessions, see ssl_asn1.c). */ X509 *peer; /* when app_verify_callback accepts a session where the peer's certificate * is not ok, we must remember the error for session reuse: */ long verify_result; /* only for servers */ int references; long timeout; long time; int compress_meth; /* Need to lookup the method */ SSL_CIPHER *cipher; unsigned long cipher_id; /* when ASN.1 loaded, this * needs to be used to load * the 'cipher' structure */ STACK_OF(SSL_CIPHER) *ciphers; /* shared ciphers? */ CRYPTO_EX_DATA ex_data; /* application specific data */ /* These are used to make removal of session-ids more * efficient and to implement a maximum cache size. */ struct ssl_session_st *prev,*next; } SSL_SESSION; #define SSL_OP_MICROSOFT_SESS_ID_BUG 0x00000001L #define SSL_OP_NETSCAPE_CHALLENGE_BUG 0x00000002L #define SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG 0x00000008L #define SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG 0x00000010L #define SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER 0x00000020L #define SSL_OP_MSIE_SSLV2_RSA_PADDING 0x00000040L /* no effect since 0.9.7h and 0.9.8b */ #define SSL_OP_SSLEAY_080_CLIENT_DH_BUG 0x00000080L #define SSL_OP_TLS_D5_BUG 0x00000100L #define SSL_OP_TLS_BLOCK_PADDING_BUG 0x00000200L /* Disable SSL 3.0/TLS 1.0 CBC vulnerability workaround that was added * in OpenSSL 0.9.6d. Usually (depending on the application protocol) * the workaround is not needed. Unfortunately some broken SSL/TLS * implementations cannot handle it at all, which is why we include * it in SSL_OP_ALL. */ #define SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS 0x00000800L /* added in 0.9.6e */ /* SSL_OP_ALL: various bug workarounds that should be rather harmless. * This used to be 0x000FFFFFL before 0.9.7. */ #define SSL_OP_ALL 0x00000FFFL /* DTLS options */ #define SSL_OP_NO_QUERY_MTU 0x00001000L /* Turn on Cookie Exchange (on relevant for servers) */ #define SSL_OP_COOKIE_EXCHANGE 0x00002000L /* As server, disallow session resumption on renegotiation */ #define SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION 0x00010000L /* If set, always create a new key when using tmp_ecdh parameters */ #define SSL_OP_SINGLE_ECDH_USE 0x00080000L /* If set, always create a new key when using tmp_dh parameters */ #define SSL_OP_SINGLE_DH_USE 0x00100000L /* Set to always use the tmp_rsa key when doing RSA operations, * even when this violates protocol specs */ #define SSL_OP_EPHEMERAL_RSA 0x00200000L /* Set on servers to choose the cipher according to the server's * preferences */ #define SSL_OP_CIPHER_SERVER_PREFERENCE 0x00400000L /* If set, a server will allow a client to issue a SSLv3.0 version number * as latest version supported in the premaster secret, even when TLSv1.0 * (version 3.1) was announced in the client hello. Normally this is * forbidden to prevent version rollback attacks. */ #define SSL_OP_TLS_ROLLBACK_BUG 0x00800000L #define SSL_OP_NO_SSLv2 0x01000000L #define SSL_OP_NO_SSLv3 0x02000000L #define SSL_OP_NO_TLSv1 0x04000000L /* The next flag deliberately changes the ciphertest, this is a check * for the PKCS#1 attack */ #define SSL_OP_PKCS1_CHECK_1 0x08000000L #define SSL_OP_PKCS1_CHECK_2 0x10000000L #define SSL_OP_NETSCAPE_CA_DN_BUG 0x20000000L #define SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG 0x40000000L /* Allow SSL_write(..., n) to return r with 0 < r < n (i.e. report success * when just a single record has been written): */ #define SSL_MODE_ENABLE_PARTIAL_WRITE 0x00000001L /* Make it possible to retry SSL_write() with changed buffer location * (buffer contents must stay the same!); this is not the default to avoid * the misconception that non-blocking SSL_write() behaves like * non-blocking write(): */ #define SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER 0x00000002L /* Never bother the application with retries if the transport * is blocking: */ #define SSL_MODE_AUTO_RETRY 0x00000004L /* Don't attempt to automatically build certificate chain */ #define SSL_MODE_NO_AUTO_CHAIN 0x00000008L /* Note: SSL[_CTX]_set_{options,mode} use |= op on the previous value, * they cannot be used to clear bits. */ #define SSL_CTX_set_options(ctx,op) \ SSL_CTX_ctrl((ctx),SSL_CTRL_OPTIONS,(op),NULL) #define SSL_CTX_get_options(ctx) \ SSL_CTX_ctrl((ctx),SSL_CTRL_OPTIONS,0,NULL) #define SSL_set_options(ssl,op) \ SSL_ctrl((ssl),SSL_CTRL_OPTIONS,(op),NULL) #define SSL_get_options(ssl) \ SSL_ctrl((ssl),SSL_CTRL_OPTIONS,0,NULL) #define SSL_CTX_set_mode(ctx,op) \ SSL_CTX_ctrl((ctx),SSL_CTRL_MODE,(op),NULL) #define SSL_CTX_get_mode(ctx) \ SSL_CTX_ctrl((ctx),SSL_CTRL_MODE,0,NULL) #define SSL_set_mode(ssl,op) \ SSL_ctrl((ssl),SSL_CTRL_MODE,(op),NULL) #define SSL_get_mode(ssl) \ SSL_ctrl((ssl),SSL_CTRL_MODE,0,NULL) #define SSL_set_mtu(ssl, mtu) \ SSL_ctrl((ssl),SSL_CTRL_SET_MTU,(mtu),NULL) void SSL_CTX_set_msg_callback(SSL_CTX *ctx, void (*cb)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg)); void SSL_set_msg_callback(SSL *ssl, void (*cb)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg)); #define SSL_CTX_set_msg_callback_arg(ctx, arg) SSL_CTX_ctrl((ctx), SSL_CTRL_SET_MSG_CALLBACK_ARG, 0, (arg)) #define SSL_set_msg_callback_arg(ssl, arg) SSL_ctrl((ssl), SSL_CTRL_SET_MSG_CALLBACK_ARG, 0, (arg)) #if defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_WIN32) #define SSL_MAX_CERT_LIST_DEFAULT 1024*30 /* 30k max cert list :-) */ #else #define SSL_MAX_CERT_LIST_DEFAULT 1024*100 /* 100k max cert list :-) */ #endif #define SSL_SESSION_CACHE_MAX_SIZE_DEFAULT (1024*20) /* This callback type is used inside SSL_CTX, SSL, and in the functions that set * them. It is used to override the generation of SSL/TLS session IDs in a * server. Return value should be zero on an error, non-zero to proceed. Also, * callbacks should themselves check if the id they generate is unique otherwise * the SSL handshake will fail with an error - callbacks can do this using the * 'ssl' value they're passed by; * SSL_has_matching_session_id(ssl, id, *id_len) * The length value passed in is set at the maximum size the session ID can be. * In SSLv2 this is 16 bytes, whereas SSLv3/TLSv1 it is 32 bytes. The callback * can alter this length to be less if desired, but under SSLv2 session IDs are * supposed to be fixed at 16 bytes so the id will be padded after the callback * returns in this case. It is also an error for the callback to set the size to * zero. */ typedef int (*GEN_SESSION_CB)(const SSL *ssl, unsigned char *id, unsigned int *id_len); typedef struct ssl_comp_st { int id; const char *name; #ifndef OPENSSL_NO_COMP COMP_METHOD *method; #else char *method; #endif } SSL_COMP; DECLARE_STACK_OF(SSL_COMP) struct ssl_ctx_st { SSL_METHOD *method; STACK_OF(SSL_CIPHER) *cipher_list; /* same as above but sorted for lookup */ STACK_OF(SSL_CIPHER) *cipher_list_by_id; struct x509_store_st /* X509_STORE */ *cert_store; struct lhash_st /* LHASH */ *sessions; /* a set of SSL_SESSIONs */ /* Most session-ids that will be cached, default is * SSL_SESSION_CACHE_MAX_SIZE_DEFAULT. 0 is unlimited. */ unsigned long session_cache_size; struct ssl_session_st *session_cache_head; struct ssl_session_st *session_cache_tail; /* This can have one of 2 values, ored together, * SSL_SESS_CACHE_CLIENT, * SSL_SESS_CACHE_SERVER, * Default is SSL_SESSION_CACHE_SERVER, which means only * SSL_accept which cache SSL_SESSIONS. */ int session_cache_mode; /* If timeout is not 0, it is the default timeout value set * when SSL_new() is called. This has been put in to make * life easier to set things up */ long session_timeout; /* If this callback is not null, it will be called each * time a session id is added to the cache. If this function * returns 1, it means that the callback will do a * SSL_SESSION_free() when it has finished using it. Otherwise, * on 0, it means the callback has finished with it. * If remove_session_cb is not null, it will be called when * a session-id is removed from the cache. After the call, * OpenSSL will SSL_SESSION_free() it. */ int (*new_session_cb)(struct ssl_st *ssl,SSL_SESSION *sess); void (*remove_session_cb)(struct ssl_ctx_st *ctx,SSL_SESSION *sess); SSL_SESSION *(*get_session_cb)(struct ssl_st *ssl, unsigned char *data,int len,int *copy); struct { int sess_connect; /* SSL new conn - started */ int sess_connect_renegotiate;/* SSL reneg - requested */ int sess_connect_good; /* SSL new conne/reneg - finished */ int sess_accept; /* SSL new accept - started */ int sess_accept_renegotiate;/* SSL reneg - requested */ int sess_accept_good; /* SSL accept/reneg - finished */ int sess_miss; /* session lookup misses */ int sess_timeout; /* reuse attempt on timeouted session */ int sess_cache_full; /* session removed due to full cache */ int sess_hit; /* session reuse actually done */ int sess_cb_hit; /* session-id that was not * in the cache was * passed back via the callback. This * indicates that the application is * supplying session-id's from other * processes - spooky :-) */ } stats; int references; /* if defined, these override the X509_verify_cert() calls */ int (*app_verify_callback)(X509_STORE_CTX *, void *); void *app_verify_arg; /* before OpenSSL 0.9.7, 'app_verify_arg' was ignored * ('app_verify_callback' was called with just one argument) */ /* Default password callback. */ pem_password_cb *default_passwd_callback; /* Default password callback user data. */ void *default_passwd_callback_userdata; /* get client cert callback */ int (*client_cert_cb)(SSL *ssl, X509 **x509, EVP_PKEY **pkey); /* cookie generate callback */ int (*app_gen_cookie_cb)(SSL *ssl, unsigned char *cookie, unsigned int *cookie_len); /* verify cookie callback */ int (*app_verify_cookie_cb)(SSL *ssl, unsigned char *cookie, unsigned int cookie_len); CRYPTO_EX_DATA ex_data; const EVP_MD *rsa_md5;/* For SSLv2 - name is 'ssl2-md5' */ const EVP_MD *md5; /* For SSLv3/TLSv1 'ssl3-md5' */ const EVP_MD *sha1; /* For SSLv3/TLSv1 'ssl3->sha1' */ STACK_OF(X509) *extra_certs; STACK_OF(SSL_COMP) *comp_methods; /* stack of SSL_COMP, SSLv3/TLSv1 */ /* Default values used when no per-SSL value is defined follow */ void (*info_callback)(const SSL *ssl,int type,int val); /* used if SSL's info_callback is NULL */ /* what we put in client cert requests */ STACK_OF(X509_NAME) *client_CA; /* Default values to use in SSL structures follow (these are copied by SSL_new) */ unsigned long options; unsigned long mode; long max_cert_list; struct cert_st /* CERT */ *cert; int read_ahead; /* callback that allows applications to peek at protocol messages */ void (*msg_callback)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg); void *msg_callback_arg; int verify_mode; unsigned int sid_ctx_length; unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; int (*default_verify_callback)(int ok,X509_STORE_CTX *ctx); /* called 'verify_callback' in the SSL */ /* Default generate session ID callback. */ GEN_SESSION_CB generate_session_id; X509_VERIFY_PARAM *param; #if 0 int purpose; /* Purpose setting */ int trust; /* Trust setting */ #endif int quiet_shutdown; }; #define SSL_SESS_CACHE_OFF 0x0000 #define SSL_SESS_CACHE_CLIENT 0x0001 #define SSL_SESS_CACHE_SERVER 0x0002 #define SSL_SESS_CACHE_BOTH (SSL_SESS_CACHE_CLIENT|SSL_SESS_CACHE_SERVER) #define SSL_SESS_CACHE_NO_AUTO_CLEAR 0x0080 /* enough comments already ... see SSL_CTX_set_session_cache_mode(3) */ #define SSL_SESS_CACHE_NO_INTERNAL_LOOKUP 0x0100 #define SSL_SESS_CACHE_NO_INTERNAL_STORE 0x0200 #define SSL_SESS_CACHE_NO_INTERNAL \ (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP|SSL_SESS_CACHE_NO_INTERNAL_STORE) struct lhash_st *SSL_CTX_sessions(SSL_CTX *ctx); #define SSL_CTX_sess_number(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_NUMBER,0,NULL) #define SSL_CTX_sess_connect(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CONNECT,0,NULL) #define SSL_CTX_sess_connect_good(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CONNECT_GOOD,0,NULL) #define SSL_CTX_sess_connect_renegotiate(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CONNECT_RENEGOTIATE,0,NULL) #define SSL_CTX_sess_accept(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_ACCEPT,0,NULL) #define SSL_CTX_sess_accept_renegotiate(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_ACCEPT_RENEGOTIATE,0,NULL) #define SSL_CTX_sess_accept_good(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_ACCEPT_GOOD,0,NULL) #define SSL_CTX_sess_hits(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_HIT,0,NULL) #define SSL_CTX_sess_cb_hits(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CB_HIT,0,NULL) #define SSL_CTX_sess_misses(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_MISSES,0,NULL) #define SSL_CTX_sess_timeouts(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_TIMEOUTS,0,NULL) #define SSL_CTX_sess_cache_full(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CACHE_FULL,0,NULL) #define SSL_CTX_sess_set_new_cb(ctx,cb) ((ctx)->new_session_cb=(cb)) #define SSL_CTX_sess_get_new_cb(ctx) ((ctx)->new_session_cb) #define SSL_CTX_sess_set_remove_cb(ctx,cb) ((ctx)->remove_session_cb=(cb)) #define SSL_CTX_sess_get_remove_cb(ctx) ((ctx)->remove_session_cb) #define SSL_CTX_sess_set_get_cb(ctx,cb) ((ctx)->get_session_cb=(cb)) #define SSL_CTX_sess_get_get_cb(ctx) ((ctx)->get_session_cb) #define SSL_CTX_set_info_callback(ctx,cb) ((ctx)->info_callback=(cb)) #define SSL_CTX_get_info_callback(ctx) ((ctx)->info_callback) #define SSL_CTX_set_client_cert_cb(ctx,cb) ((ctx)->client_cert_cb=(cb)) #define SSL_CTX_get_client_cert_cb(ctx) ((ctx)->client_cert_cb) #define SSL_CTX_set_cookie_generate_cb(ctx,cb) ((ctx)->app_gen_cookie_cb=(cb)) #define SSL_CTX_set_cookie_verify_cb(ctx,cb) ((ctx)->app_verify_cookie_cb=(cb)) #define SSL_NOTHING 1 #define SSL_WRITING 2 #define SSL_READING 3 #define SSL_X509_LOOKUP 4 /* These will only be used when doing non-blocking IO */ #define SSL_want_nothing(s) (SSL_want(s) == SSL_NOTHING) #define SSL_want_read(s) (SSL_want(s) == SSL_READING) #define SSL_want_write(s) (SSL_want(s) == SSL_WRITING) #define SSL_want_x509_lookup(s) (SSL_want(s) == SSL_X509_LOOKUP) struct ssl_st { /* protocol version * (one of SSL2_VERSION, SSL3_VERSION, TLS1_VERSION, DTLS1_VERSION) */ int version; int type; /* SSL_ST_CONNECT or SSL_ST_ACCEPT */ SSL_METHOD *method; /* SSLv3 */ /* There are 2 BIO's even though they are normally both the * same. This is so data can be read and written to different * handlers */ #ifndef OPENSSL_NO_BIO BIO *rbio; /* used by SSL_read */ BIO *wbio; /* used by SSL_write */ BIO *bbio; /* used during session-id reuse to concatenate * messages */ #else char *rbio; /* used by SSL_read */ char *wbio; /* used by SSL_write */ char *bbio; #endif /* This holds a variable that indicates what we were doing * when a 0 or -1 is returned. This is needed for * non-blocking IO so we know what request needs re-doing when * in SSL_accept or SSL_connect */ int rwstate; /* true when we are actually in SSL_accept() or SSL_connect() */ int in_handshake; int (*handshake_func)(SSL *); /* Imagine that here's a boolean member "init" that is * switched as soon as SSL_set_{accept/connect}_state * is called for the first time, so that "state" and * "handshake_func" are properly initialized. But as * handshake_func is == 0 until then, we use this * test instead of an "init" member. */ int server; /* are we the server side? - mostly used by SSL_clear*/ int new_session;/* 1 if we are to use a new session. * 2 if we are a server and are inside a handshake * (i.e. not just sending a HelloRequest) * NB: For servers, the 'new' session may actually be a previously * cached session or even the previous session unless * SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION is set */ int quiet_shutdown;/* don't send shutdown packets */ int shutdown; /* we have shut things down, 0x01 sent, 0x02 * for received */ int state; /* where we are */ int rstate; /* where we are when reading */ BUF_MEM *init_buf; /* buffer used during init */ void *init_msg; /* pointer to handshake message body, set by ssl3_get_message() */ int init_num; /* amount read/written */ int init_off; /* amount read/written */ /* used internally to point at a raw packet */ unsigned char *packet; unsigned int packet_length; struct ssl2_state_st *s2; /* SSLv2 variables */ struct ssl3_state_st *s3; /* SSLv3 variables */ struct dtls1_state_st *d1; /* DTLSv1 variables */ int read_ahead; /* Read as many input bytes as possible * (for non-blocking reads) */ /* callback that allows applications to peek at protocol messages */ void (*msg_callback)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg); void *msg_callback_arg; int hit; /* reusing a previous session */ X509_VERIFY_PARAM *param; #if 0 int purpose; /* Purpose setting */ int trust; /* Trust setting */ #endif /* crypto */ STACK_OF(SSL_CIPHER) *cipher_list; STACK_OF(SSL_CIPHER) *cipher_list_by_id; /* These are the ones being used, the ones in SSL_SESSION are * the ones to be 'copied' into these ones */ EVP_CIPHER_CTX *enc_read_ctx; /* cryptographic state */ const EVP_MD *read_hash; /* used for mac generation */ #ifndef OPENSSL_NO_COMP COMP_CTX *expand; /* uncompress */ #else char *expand; #endif EVP_CIPHER_CTX *enc_write_ctx; /* cryptographic state */ const EVP_MD *write_hash; /* used for mac generation */ #ifndef OPENSSL_NO_COMP COMP_CTX *compress; /* compression */ #else char *compress; #endif /* session info */ /* client cert? */ /* This is used to hold the server certificate used */ struct cert_st /* CERT */ *cert; /* the session_id_context is used to ensure sessions are only reused * in the appropriate context */ unsigned int sid_ctx_length; unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH]; /* This can also be in the session once a session is established */ SSL_SESSION *session; /* Default generate session ID callback. */ GEN_SESSION_CB generate_session_id; /* Used in SSL2 and SSL3 */ int verify_mode; /* 0 don't care about verify failure. * 1 fail if verify fails */ int (*verify_callback)(int ok,X509_STORE_CTX *ctx); /* fail if callback returns 0 */ void (*info_callback)(const SSL *ssl,int type,int val); /* optional informational callback */ int error; /* error bytes to be written */ int error_code; /* actual code */ #ifndef OPENSSL_NO_KRB5 KSSL_CTX *kssl_ctx; /* Kerberos 5 context */ #endif /* OPENSSL_NO_KRB5 */ SSL_CTX *ctx; /* set this flag to 1 and a sleep(1) is put into all SSL_read() * and SSL_write() calls, good for nbio debuging :-) */ int debug; /* extra application data */ long verify_result; CRYPTO_EX_DATA ex_data; /* for server side, keep the list of CA_dn we can use */ STACK_OF(X509_NAME) *client_CA; int references; unsigned long options; /* protocol behaviour */ unsigned long mode; /* API behaviour */ long max_cert_list; int first_packet; int client_version; /* what was passed, used for * SSLv3/TLS rollback check */ }; #ifdef __cplusplus } #endif #include <openssl/ssl2.h> #include <openssl/ssl3.h> #include <openssl/tls1.h> /* This is mostly sslv3 with a few tweaks */ #include <openssl/dtls1.h> /* Datagram TLS */ #include <openssl/ssl23.h> #ifdef __cplusplus extern "C" { #endif /* compatibility */ #define SSL_set_app_data(s,arg) (SSL_set_ex_data(s,0,(char *)arg)) #define SSL_get_app_data(s) (SSL_get_ex_data(s,0)) #define SSL_SESSION_set_app_data(s,a) (SSL_SESSION_set_ex_data(s,0,(char *)a)) #define SSL_SESSION_get_app_data(s) (SSL_SESSION_get_ex_data(s,0)) #define SSL_CTX_get_app_data(ctx) (SSL_CTX_get_ex_data(ctx,0)) #define SSL_CTX_set_app_data(ctx,arg) (SSL_CTX_set_ex_data(ctx,0,(char *)arg)) /* The following are the possible values for ssl->state are are * used to indicate where we are up to in the SSL connection establishment. * The macros that follow are about the only things you should need to use * and even then, only when using non-blocking IO. * It can also be useful to work out where you were when the connection * failed */ #define SSL_ST_CONNECT 0x1000 #define SSL_ST_ACCEPT 0x2000 #define SSL_ST_MASK 0x0FFF #define SSL_ST_INIT (SSL_ST_CONNECT|SSL_ST_ACCEPT) #define SSL_ST_BEFORE 0x4000 #define SSL_ST_OK 0x03 #define SSL_ST_RENEGOTIATE (0x04|SSL_ST_INIT) #define SSL_CB_LOOP 0x01 #define SSL_CB_EXIT 0x02 #define SSL_CB_READ 0x04 #define SSL_CB_WRITE 0x08 #define SSL_CB_ALERT 0x4000 /* used in callback */ #define SSL_CB_READ_ALERT (SSL_CB_ALERT|SSL_CB_READ) #define SSL_CB_WRITE_ALERT (SSL_CB_ALERT|SSL_CB_WRITE) #define SSL_CB_ACCEPT_LOOP (SSL_ST_ACCEPT|SSL_CB_LOOP) #define SSL_CB_ACCEPT_EXIT (SSL_ST_ACCEPT|SSL_CB_EXIT) #define SSL_CB_CONNECT_LOOP (SSL_ST_CONNECT|SSL_CB_LOOP) #define SSL_CB_CONNECT_EXIT (SSL_ST_CONNECT|SSL_CB_EXIT) #define SSL_CB_HANDSHAKE_START 0x10 #define SSL_CB_HANDSHAKE_DONE 0x20 /* Is the SSL_connection established? */ #define SSL_get_state(a) SSL_state(a) #define SSL_is_init_finished(a) (SSL_state(a) == SSL_ST_OK) #define SSL_in_init(a) (SSL_state(a)&SSL_ST_INIT) #define SSL_in_before(a) (SSL_state(a)&SSL_ST_BEFORE) #define SSL_in_connect_init(a) (SSL_state(a)&SSL_ST_CONNECT) #define SSL_in_accept_init(a) (SSL_state(a)&SSL_ST_ACCEPT) /* The following 2 states are kept in ssl->rstate when reads fail, * you should not need these */ #define SSL_ST_READ_HEADER 0xF0 #define SSL_ST_READ_BODY 0xF1 #define SSL_ST_READ_DONE 0xF2 /* Obtain latest Finished message * -- that we sent (SSL_get_finished) * -- that we expected from peer (SSL_get_peer_finished). * Returns length (0 == no Finished so far), copies up to 'count' bytes. */ size_t SSL_get_finished(const SSL *s, void *buf, size_t count); size_t SSL_get_peer_finished(const SSL *s, void *buf, size_t count); /* use either SSL_VERIFY_NONE or SSL_VERIFY_PEER, the last 2 options * are 'ored' with SSL_VERIFY_PEER if they are desired */ #define SSL_VERIFY_NONE 0x00 #define SSL_VERIFY_PEER 0x01 #define SSL_VERIFY_FAIL_IF_NO_PEER_CERT 0x02 #define SSL_VERIFY_CLIENT_ONCE 0x04 #define OpenSSL_add_ssl_algorithms() SSL_library_init() #define SSLeay_add_ssl_algorithms() SSL_library_init() /* this is for backward compatibility */ #if 0 /* NEW_SSLEAY */ #define SSL_CTX_set_default_verify(a,b,c) SSL_CTX_set_verify(a,b,c) #define SSL_set_pref_cipher(c,n) SSL_set_cipher_list(c,n) #define SSL_add_session(a,b) SSL_CTX_add_session((a),(b)) #define SSL_remove_session(a,b) SSL_CTX_remove_session((a),(b)) #define SSL_flush_sessions(a,b) SSL_CTX_flush_sessions((a),(b)) #endif /* More backward compatibility */ #define SSL_get_cipher(s) \ SSL_CIPHER_get_name(SSL_get_current_cipher(s)) #define SSL_get_cipher_bits(s,np) \ SSL_CIPHER_get_bits(SSL_get_current_cipher(s),np) #define SSL_get_cipher_version(s) \ SSL_CIPHER_get_version(SSL_get_current_cipher(s)) #define SSL_get_cipher_name(s) \ SSL_CIPHER_get_name(SSL_get_current_cipher(s)) #define SSL_get_time(a) SSL_SESSION_get_time(a) #define SSL_set_time(a,b) SSL_SESSION_set_time((a),(b)) #define SSL_get_timeout(a) SSL_SESSION_get_timeout(a) #define SSL_set_timeout(a,b) SSL_SESSION_set_timeout((a),(b)) #if 1 /*SSLEAY_MACROS*/ #define d2i_SSL_SESSION_bio(bp,s_id) ASN1_d2i_bio_of(SSL_SESSION,SSL_SESSION_new,d2i_SSL_SESSION,bp,s_id) #define i2d_SSL_SESSION_bio(bp,s_id) ASN1_i2d_bio_of(SSL_SESSION,i2d_SSL_SESSION,bp,s_id) #define PEM_read_SSL_SESSION(fp,x,cb,u) (SSL_SESSION *)PEM_ASN1_read( \ (char *(*)())d2i_SSL_SESSION,PEM_STRING_SSL_SESSION,fp,(char **)x,cb,u) #define PEM_read_bio_SSL_SESSION(bp,x,cb,u) PEM_ASN1_read_bio_of(SSL_SESSION,d2i_SSL_SESSION,PEM_STRING_SSL_SESSION,bp,x,cb,u) #define PEM_write_SSL_SESSION(fp,x) \ PEM_ASN1_write((int (*)())i2d_SSL_SESSION, \ PEM_STRING_SSL_SESSION,fp, (char *)x, NULL,NULL,0,NULL,NULL) #define PEM_write_bio_SSL_SESSION(bp,x) \ PEM_ASN1_write_bio_of(SSL_SESSION,i2d_SSL_SESSION,PEM_STRING_SSL_SESSION,bp,x,NULL,NULL,0,NULL,NULL) #endif #define SSL_AD_REASON_OFFSET 1000 /* These alert types are for SSLv3 and TLSv1 */ #define SSL_AD_CLOSE_NOTIFY SSL3_AD_CLOSE_NOTIFY #define SSL_AD_UNEXPECTED_MESSAGE SSL3_AD_UNEXPECTED_MESSAGE /* fatal */ #define SSL_AD_BAD_RECORD_MAC SSL3_AD_BAD_RECORD_MAC /* fatal */ #define SSL_AD_DECRYPTION_FAILED TLS1_AD_DECRYPTION_FAILED #define SSL_AD_RECORD_OVERFLOW TLS1_AD_RECORD_OVERFLOW #define SSL_AD_DECOMPRESSION_FAILURE SSL3_AD_DECOMPRESSION_FAILURE/* fatal */ #define SSL_AD_HANDSHAKE_FAILURE SSL3_AD_HANDSHAKE_FAILURE/* fatal */ #define SSL_AD_NO_CERTIFICATE SSL3_AD_NO_CERTIFICATE /* Not for TLS */ #define SSL_AD_BAD_CERTIFICATE SSL3_AD_BAD_CERTIFICATE #define SSL_AD_UNSUPPORTED_CERTIFICATE SSL3_AD_UNSUPPORTED_CERTIFICATE #define SSL_AD_CERTIFICATE_REVOKED SSL3_AD_CERTIFICATE_REVOKED #define SSL_AD_CERTIFICATE_EXPIRED SSL3_AD_CERTIFICATE_EXPIRED #define SSL_AD_CERTIFICATE_UNKNOWN SSL3_AD_CERTIFICATE_UNKNOWN #define SSL_AD_ILLEGAL_PARAMETER SSL3_AD_ILLEGAL_PARAMETER /* fatal */ #define SSL_AD_UNKNOWN_CA TLS1_AD_UNKNOWN_CA /* fatal */ #define SSL_AD_ACCESS_DENIED TLS1_AD_ACCESS_DENIED /* fatal */ #define SSL_AD_DECODE_ERROR TLS1_AD_DECODE_ERROR /* fatal */ #define SSL_AD_DECRYPT_ERROR TLS1_AD_DECRYPT_ERROR #define SSL_AD_EXPORT_RESTRICTION TLS1_AD_EXPORT_RESTRICTION/* fatal */ #define SSL_AD_PROTOCOL_VERSION TLS1_AD_PROTOCOL_VERSION /* fatal */ #define SSL_AD_INSUFFICIENT_SECURITY TLS1_AD_INSUFFICIENT_SECURITY/* fatal */ #define SSL_AD_INTERNAL_ERROR TLS1_AD_INTERNAL_ERROR /* fatal */ #define SSL_AD_USER_CANCELLED TLS1_AD_USER_CANCELLED #define SSL_AD_NO_RENEGOTIATION TLS1_AD_NO_RENEGOTIATION #define SSL_ERROR_NONE 0 #define SSL_ERROR_SSL 1 #define SSL_ERROR_WANT_READ 2 #define SSL_ERROR_WANT_WRITE 3 #define SSL_ERROR_WANT_X509_LOOKUP 4 #define SSL_ERROR_SYSCALL 5 /* look at error stack/return value/errno */ #define SSL_ERROR_ZERO_RETURN 6 #define SSL_ERROR_WANT_CONNECT 7 #define SSL_ERROR_WANT_ACCEPT 8 #define SSL_CTRL_NEED_TMP_RSA 1 #define SSL_CTRL_SET_TMP_RSA 2 #define SSL_CTRL_SET_TMP_DH 3 #define SSL_CTRL_SET_TMP_ECDH 4 #define SSL_CTRL_SET_TMP_RSA_CB 5 #define SSL_CTRL_SET_TMP_DH_CB 6 #define SSL_CTRL_SET_TMP_ECDH_CB 7 #define SSL_CTRL_GET_SESSION_REUSED 8 #define SSL_CTRL_GET_CLIENT_CERT_REQUEST 9 #define SSL_CTRL_GET_NUM_RENEGOTIATIONS 10 #define SSL_CTRL_CLEAR_NUM_RENEGOTIATIONS 11 #define SSL_CTRL_GET_TOTAL_RENEGOTIATIONS 12 #define SSL_CTRL_GET_FLAGS 13 #define SSL_CTRL_EXTRA_CHAIN_CERT 14 #define SSL_CTRL_SET_MSG_CALLBACK 15 #define SSL_CTRL_SET_MSG_CALLBACK_ARG 16 /* only applies to datagram connections */ #define SSL_CTRL_SET_MTU 17 /* Stats */ #define SSL_CTRL_SESS_NUMBER 20 #define SSL_CTRL_SESS_CONNECT 21 #define SSL_CTRL_SESS_CONNECT_GOOD 22 #define SSL_CTRL_SESS_CONNECT_RENEGOTIATE 23 #define SSL_CTRL_SESS_ACCEPT 24 #define SSL_CTRL_SESS_ACCEPT_GOOD 25 #define SSL_CTRL_SESS_ACCEPT_RENEGOTIATE 26 #define SSL_CTRL_SESS_HIT 27 #define SSL_CTRL_SESS_CB_HIT 28 #define SSL_CTRL_SESS_MISSES 29 #define SSL_CTRL_SESS_TIMEOUTS 30 #define SSL_CTRL_SESS_CACHE_FULL 31 #define SSL_CTRL_OPTIONS 32 #define SSL_CTRL_MODE 33 #define SSL_CTRL_GET_READ_AHEAD 40 #define SSL_CTRL_SET_READ_AHEAD 41 #define SSL_CTRL_SET_SESS_CACHE_SIZE 42 #define SSL_CTRL_GET_SESS_CACHE_SIZE 43 #define SSL_CTRL_SET_SESS_CACHE_MODE 44 #define SSL_CTRL_GET_SESS_CACHE_MODE 45 #define SSL_CTRL_GET_MAX_CERT_LIST 50 #define SSL_CTRL_SET_MAX_CERT_LIST 51 #define SSL_session_reused(ssl) \ SSL_ctrl((ssl),SSL_CTRL_GET_SESSION_REUSED,0,NULL) #define SSL_num_renegotiations(ssl) \ SSL_ctrl((ssl),SSL_CTRL_GET_NUM_RENEGOTIATIONS,0,NULL) #define SSL_clear_num_renegotiations(ssl) \ SSL_ctrl((ssl),SSL_CTRL_CLEAR_NUM_RENEGOTIATIONS,0,NULL) #define SSL_total_renegotiations(ssl) \ SSL_ctrl((ssl),SSL_CTRL_GET_TOTAL_RENEGOTIATIONS,0,NULL) #define SSL_CTX_need_tmp_RSA(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_NEED_TMP_RSA,0,NULL) #define SSL_CTX_set_tmp_rsa(ctx,rsa) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_RSA,0,(char *)rsa) #define SSL_CTX_set_tmp_dh(ctx,dh) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_DH,0,(char *)dh) #define SSL_CTX_set_tmp_ecdh(ctx,ecdh) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_ECDH,0,(char *)ecdh) #define SSL_need_tmp_RSA(ssl) \ SSL_ctrl(ssl,SSL_CTRL_NEED_TMP_RSA,0,NULL) #define SSL_set_tmp_rsa(ssl,rsa) \ SSL_ctrl(ssl,SSL_CTRL_SET_TMP_RSA,0,(char *)rsa) #define SSL_set_tmp_dh(ssl,dh) \ SSL_ctrl(ssl,SSL_CTRL_SET_TMP_DH,0,(char *)dh) #define SSL_set_tmp_ecdh(ssl,ecdh) \ SSL_ctrl(ssl,SSL_CTRL_SET_TMP_ECDH,0,(char *)ecdh) #define SSL_CTX_add_extra_chain_cert(ctx,x509) \ SSL_CTX_ctrl(ctx,SSL_CTRL_EXTRA_CHAIN_CERT,0,(char *)x509) #ifndef OPENSSL_NO_BIO BIO_METHOD *BIO_f_ssl(void); BIO *BIO_new_ssl(SSL_CTX *ctx,int client); BIO *BIO_new_ssl_connect(SSL_CTX *ctx); BIO *BIO_new_buffer_ssl_connect(SSL_CTX *ctx); int BIO_ssl_copy_session_id(BIO *to,BIO *from); void BIO_ssl_shutdown(BIO *ssl_bio); #endif int SSL_CTX_set_cipher_list(SSL_CTX *,const char *str); SSL_CTX *SSL_CTX_new(SSL_METHOD *meth); void SSL_CTX_free(SSL_CTX *); long SSL_CTX_set_timeout(SSL_CTX *ctx,long t); long SSL_CTX_get_timeout(const SSL_CTX *ctx); X509_STORE *SSL_CTX_get_cert_store(const SSL_CTX *); void SSL_CTX_set_cert_store(SSL_CTX *,X509_STORE *); int SSL_want(const SSL *s); int SSL_clear(SSL *s); void SSL_CTX_flush_sessions(SSL_CTX *ctx,long tm); SSL_CIPHER *SSL_get_current_cipher(const SSL *s); int SSL_CIPHER_get_bits(const SSL_CIPHER *c,int *alg_bits); char * SSL_CIPHER_get_version(const SSL_CIPHER *c); const char * SSL_CIPHER_get_name(const SSL_CIPHER *c); int SSL_get_fd(const SSL *s); int SSL_get_rfd(const SSL *s); int SSL_get_wfd(const SSL *s); const char * SSL_get_cipher_list(const SSL *s,int n); char * SSL_get_shared_ciphers(const SSL *s, char *buf, int len); int SSL_get_read_ahead(const SSL * s); int SSL_pending(const SSL *s); #ifndef OPENSSL_NO_SOCK int SSL_set_fd(SSL *s, int fd); int SSL_set_rfd(SSL *s, int fd); int SSL_set_wfd(SSL *s, int fd); #endif #ifndef OPENSSL_NO_BIO void SSL_set_bio(SSL *s, BIO *rbio,BIO *wbio); BIO * SSL_get_rbio(const SSL *s); BIO * SSL_get_wbio(const SSL *s); #endif int SSL_set_cipher_list(SSL *s, const char *str); void SSL_set_read_ahead(SSL *s, int yes); int SSL_get_verify_mode(const SSL *s); int SSL_get_verify_depth(const SSL *s); int (*SSL_get_verify_callback(const SSL *s))(int,X509_STORE_CTX *); void SSL_set_verify(SSL *s, int mode, int (*callback)(int ok,X509_STORE_CTX *ctx)); void SSL_set_verify_depth(SSL *s, int depth); #ifndef OPENSSL_NO_RSA int SSL_use_RSAPrivateKey(SSL *ssl, RSA *rsa); #endif int SSL_use_RSAPrivateKey_ASN1(SSL *ssl, unsigned char *d, long len); int SSL_use_PrivateKey(SSL *ssl, EVP_PKEY *pkey); int SSL_use_PrivateKey_ASN1(int pk,SSL *ssl, const unsigned char *d, long len); int SSL_use_certificate(SSL *ssl, X509 *x); int SSL_use_certificate_ASN1(SSL *ssl, const unsigned char *d, int len); #ifndef OPENSSL_NO_STDIO int SSL_use_RSAPrivateKey_file(SSL *ssl, const char *file, int type); int SSL_use_PrivateKey_file(SSL *ssl, const char *file, int type); int SSL_use_certificate_file(SSL *ssl, const char *file, int type); int SSL_CTX_use_RSAPrivateKey_file(SSL_CTX *ctx, const char *file, int type); int SSL_CTX_use_PrivateKey_file(SSL_CTX *ctx, const char *file, int type); int SSL_CTX_use_certificate_file(SSL_CTX *ctx, const char *file, int type); int SSL_CTX_use_certificate_chain_file(SSL_CTX *ctx, const char *file); /* PEM type */ STACK_OF(X509_NAME) *SSL_load_client_CA_file(const char *file); int SSL_add_file_cert_subjects_to_stack(STACK_OF(X509_NAME) *stackCAs, const char *file); #ifndef OPENSSL_SYS_VMS #ifndef OPENSSL_SYS_MACINTOSH_CLASSIC /* XXXXX: Better scheme needed! [was: #ifndef MAC_OS_pre_X] */ int SSL_add_dir_cert_subjects_to_stack(STACK_OF(X509_NAME) *stackCAs, const char *dir); #endif #endif #endif void SSL_load_error_strings(void ); const char *SSL_state_string(const SSL *s); const char *SSL_rstate_string(const SSL *s); const char *SSL_state_string_long(const SSL *s); const char *SSL_rstate_string_long(const SSL *s); long SSL_SESSION_get_time(const SSL_SESSION *s); long SSL_SESSION_set_time(SSL_SESSION *s, long t); long SSL_SESSION_get_timeout(const SSL_SESSION *s); long SSL_SESSION_set_timeout(SSL_SESSION *s, long t); void SSL_copy_session_id(SSL *to,const SSL *from); SSL_SESSION *SSL_SESSION_new(void); unsigned long SSL_SESSION_hash(const SSL_SESSION *a); int SSL_SESSION_cmp(const SSL_SESSION *a,const SSL_SESSION *b); const unsigned char *SSL_SESSION_get_id(const SSL_SESSION *s, unsigned int *len); #ifndef OPENSSL_NO_FP_API int SSL_SESSION_print_fp(FILE *fp,const SSL_SESSION *ses); #endif #ifndef OPENSSL_NO_BIO int SSL_SESSION_print(BIO *fp,const SSL_SESSION *ses); #endif void SSL_SESSION_free(SSL_SESSION *ses); int i2d_SSL_SESSION(SSL_SESSION *in,unsigned char **pp); int SSL_set_session(SSL *to, SSL_SESSION *session); int SSL_CTX_add_session(SSL_CTX *s, SSL_SESSION *c); int SSL_CTX_remove_session(SSL_CTX *,SSL_SESSION *c); int SSL_CTX_set_generate_session_id(SSL_CTX *, GEN_SESSION_CB); int SSL_set_generate_session_id(SSL *, GEN_SESSION_CB); int SSL_has_matching_session_id(const SSL *ssl, const unsigned char *id, unsigned int id_len); SSL_SESSION *d2i_SSL_SESSION(SSL_SESSION **a,const unsigned char **pp, long length); #ifdef HEADER_X509_H X509 * SSL_get_peer_certificate(const SSL *s); #endif STACK_OF(X509) *SSL_get_peer_cert_chain(const SSL *s); int SSL_CTX_get_verify_mode(const SSL_CTX *ctx); int SSL_CTX_get_verify_depth(const SSL_CTX *ctx); int (*SSL_CTX_get_verify_callback(const SSL_CTX *ctx))(int,X509_STORE_CTX *); void SSL_CTX_set_verify(SSL_CTX *ctx,int mode, int (*callback)(int, X509_STORE_CTX *)); void SSL_CTX_set_verify_depth(SSL_CTX *ctx,int depth); void SSL_CTX_set_cert_verify_callback(SSL_CTX *ctx, int (*cb)(X509_STORE_CTX *,void *), void *arg); #ifndef OPENSSL_NO_RSA int SSL_CTX_use_RSAPrivateKey(SSL_CTX *ctx, RSA *rsa); #endif int SSL_CTX_use_RSAPrivateKey_ASN1(SSL_CTX *ctx, const unsigned char *d, long len); int SSL_CTX_use_PrivateKey(SSL_CTX *ctx, EVP_PKEY *pkey); int SSL_CTX_use_PrivateKey_ASN1(int pk,SSL_CTX *ctx, const unsigned char *d, long len); int SSL_CTX_use_certificate(SSL_CTX *ctx, X509 *x); int SSL_CTX_use_certificate_ASN1(SSL_CTX *ctx, int len, const unsigned char *d); void SSL_CTX_set_default_passwd_cb(SSL_CTX *ctx, pem_password_cb *cb); void SSL_CTX_set_default_passwd_cb_userdata(SSL_CTX *ctx, void *u); int SSL_CTX_check_private_key(const SSL_CTX *ctx); int SSL_check_private_key(const SSL *ctx); int SSL_CTX_set_session_id_context(SSL_CTX *ctx,const unsigned char *sid_ctx, unsigned int sid_ctx_len); SSL * SSL_new(SSL_CTX *ctx); int SSL_set_session_id_context(SSL *ssl,const unsigned char *sid_ctx, unsigned int sid_ctx_len); int SSL_CTX_set_purpose(SSL_CTX *s, int purpose); int SSL_set_purpose(SSL *s, int purpose); int SSL_CTX_set_trust(SSL_CTX *s, int trust); int SSL_set_trust(SSL *s, int trust); void SSL_free(SSL *ssl); int SSL_accept(SSL *ssl); int SSL_connect(SSL *ssl); int SSL_read(SSL *ssl,void *buf,int num); int SSL_peek(SSL *ssl,void *buf,int num); int SSL_write(SSL *ssl,const void *buf,int num); long SSL_ctrl(SSL *ssl,int cmd, long larg, void *parg); long SSL_callback_ctrl(SSL *, int, void (*)(void)); long SSL_CTX_ctrl(SSL_CTX *ctx,int cmd, long larg, void *parg); long SSL_CTX_callback_ctrl(SSL_CTX *, int, void (*)(void)); int SSL_get_error(const SSL *s,int ret_code); const char *SSL_get_version(const SSL *s); /* This sets the 'default' SSL version that SSL_new() will create */ int SSL_CTX_set_ssl_version(SSL_CTX *ctx,SSL_METHOD *meth); SSL_METHOD *SSLv2_method(void); /* SSLv2 */ SSL_METHOD *SSLv2_server_method(void); /* SSLv2 */ SSL_METHOD *SSLv2_client_method(void); /* SSLv2 */ SSL_METHOD *SSLv3_method(void); /* SSLv3 */ SSL_METHOD *SSLv3_server_method(void); /* SSLv3 */ SSL_METHOD *SSLv3_client_method(void); /* SSLv3 */ SSL_METHOD *SSLv23_method(void); /* SSLv3 but can rollback to v2 */ SSL_METHOD *SSLv23_server_method(void); /* SSLv3 but can rollback to v2 */ SSL_METHOD *SSLv23_client_method(void); /* SSLv3 but can rollback to v2 */ SSL_METHOD *TLSv1_method(void); /* TLSv1.0 */ SSL_METHOD *TLSv1_server_method(void); /* TLSv1.0 */ SSL_METHOD *TLSv1_client_method(void); /* TLSv1.0 */ SSL_METHOD *DTLSv1_method(void); /* DTLSv1.0 */ SSL_METHOD *DTLSv1_server_method(void); /* DTLSv1.0 */ SSL_METHOD *DTLSv1_client_method(void); /* DTLSv1.0 */ STACK_OF(SSL_CIPHER) *SSL_get_ciphers(const SSL *s); int SSL_do_handshake(SSL *s); int SSL_renegotiate(SSL *s); int SSL_renegotiate_pending(SSL *s); int SSL_shutdown(SSL *s); SSL_METHOD *SSL_get_ssl_method(SSL *s); int SSL_set_ssl_method(SSL *s,SSL_METHOD *method); const char *SSL_alert_type_string_long(int value); const char *SSL_alert_type_string(int value); const char *SSL_alert_desc_string_long(int value); const char *SSL_alert_desc_string(int value); void SSL_set_client_CA_list(SSL *s, STACK_OF(X509_NAME) *name_list); void SSL_CTX_set_client_CA_list(SSL_CTX *ctx, STACK_OF(X509_NAME) *name_list); STACK_OF(X509_NAME) *SSL_get_client_CA_list(const SSL *s); STACK_OF(X509_NAME) *SSL_CTX_get_client_CA_list(const SSL_CTX *s); int SSL_add_client_CA(SSL *ssl,X509 *x); int SSL_CTX_add_client_CA(SSL_CTX *ctx,X509 *x); void SSL_set_connect_state(SSL *s); void SSL_set_accept_state(SSL *s); long SSL_get_default_timeout(const SSL *s); int SSL_library_init(void ); char *SSL_CIPHER_description(SSL_CIPHER *,char *buf,int size); STACK_OF(X509_NAME) *SSL_dup_CA_list(STACK_OF(X509_NAME) *sk); SSL *SSL_dup(SSL *ssl); X509 *SSL_get_certificate(const SSL *ssl); /* EVP_PKEY */ struct evp_pkey_st *SSL_get_privatekey(SSL *ssl); void SSL_CTX_set_quiet_shutdown(SSL_CTX *ctx,int mode); int SSL_CTX_get_quiet_shutdown(const SSL_CTX *ctx); void SSL_set_quiet_shutdown(SSL *ssl,int mode); int SSL_get_quiet_shutdown(const SSL *ssl); void SSL_set_shutdown(SSL *ssl,int mode); int SSL_get_shutdown(const SSL *ssl); int SSL_version(const SSL *ssl); int SSL_CTX_set_default_verify_paths(SSL_CTX *ctx); int SSL_CTX_load_verify_locations(SSL_CTX *ctx, const char *CAfile, const char *CApath); #define SSL_get0_session SSL_get_session /* just peek at pointer */ SSL_SESSION *SSL_get_session(const SSL *ssl); SSL_SESSION *SSL_get1_session(SSL *ssl); /* obtain a reference count */ SSL_CTX *SSL_get_SSL_CTX(const SSL *ssl); void SSL_set_info_callback(SSL *ssl, void (*cb)(const SSL *ssl,int type,int val)); void (*SSL_get_info_callback(const SSL *ssl))(const SSL *ssl,int type,int val); int SSL_state(const SSL *ssl); void SSL_set_verify_result(SSL *ssl,long v); long SSL_get_verify_result(const SSL *ssl); int SSL_set_ex_data(SSL *ssl,int idx,void *data); void *SSL_get_ex_data(const SSL *ssl,int idx); int SSL_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func, CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); int SSL_SESSION_set_ex_data(SSL_SESSION *ss,int idx,void *data); void *SSL_SESSION_get_ex_data(const SSL_SESSION *ss,int idx); int SSL_SESSION_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func, CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); int SSL_CTX_set_ex_data(SSL_CTX *ssl,int idx,void *data); void *SSL_CTX_get_ex_data(const SSL_CTX *ssl,int idx); int SSL_CTX_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func, CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); int SSL_get_ex_data_X509_STORE_CTX_idx(void ); #define SSL_CTX_sess_set_cache_size(ctx,t) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_SESS_CACHE_SIZE,t,NULL) #define SSL_CTX_sess_get_cache_size(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_GET_SESS_CACHE_SIZE,0,NULL) #define SSL_CTX_set_session_cache_mode(ctx,m) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_SESS_CACHE_MODE,m,NULL) #define SSL_CTX_get_session_cache_mode(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_GET_SESS_CACHE_MODE,0,NULL) #define SSL_CTX_get_default_read_ahead(ctx) SSL_CTX_get_read_ahead(ctx) #define SSL_CTX_set_default_read_ahead(ctx,m) SSL_CTX_set_read_ahead(ctx,m) #define SSL_CTX_get_read_ahead(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_GET_READ_AHEAD,0,NULL) #define SSL_CTX_set_read_ahead(ctx,m) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_READ_AHEAD,m,NULL) #define SSL_CTX_get_max_cert_list(ctx) \ SSL_CTX_ctrl(ctx,SSL_CTRL_GET_MAX_CERT_LIST,0,NULL) #define SSL_CTX_set_max_cert_list(ctx,m) \ SSL_CTX_ctrl(ctx,SSL_CTRL_SET_MAX_CERT_LIST,m,NULL) #define SSL_get_max_cert_list(ssl) \ SSL_ctrl(ssl,SSL_CTRL_GET_MAX_CERT_LIST,0,NULL) #define SSL_set_max_cert_list(ssl,m) \ SSL_ctrl(ssl,SSL_CTRL_SET_MAX_CERT_LIST,m,NULL) /* NB: the keylength is only applicable when is_export is true */ #ifndef OPENSSL_NO_RSA void SSL_CTX_set_tmp_rsa_callback(SSL_CTX *ctx, RSA *(*cb)(SSL *ssl,int is_export, int keylength)); void SSL_set_tmp_rsa_callback(SSL *ssl, RSA *(*cb)(SSL *ssl,int is_export, int keylength)); #endif #ifndef OPENSSL_NO_DH void SSL_CTX_set_tmp_dh_callback(SSL_CTX *ctx, DH *(*dh)(SSL *ssl,int is_export, int keylength)); void SSL_set_tmp_dh_callback(SSL *ssl, DH *(*dh)(SSL *ssl,int is_export, int keylength)); #endif #ifndef OPENSSL_NO_ECDH void SSL_CTX_set_tmp_ecdh_callback(SSL_CTX *ctx, EC_KEY *(*ecdh)(SSL *ssl,int is_export, int keylength)); void SSL_set_tmp_ecdh_callback(SSL *ssl, EC_KEY *(*ecdh)(SSL *ssl,int is_export, int keylength)); #endif #ifndef OPENSSL_NO_COMP const COMP_METHOD *SSL_get_current_compression(SSL *s); const COMP_METHOD *SSL_get_current_expansion(SSL *s); const char *SSL_COMP_get_name(const COMP_METHOD *comp); STACK_OF(SSL_COMP) *SSL_COMP_get_compression_methods(void); int SSL_COMP_add_compression_method(int id,COMP_METHOD *cm); #else const void *SSL_get_current_compression(SSL *s); const void *SSL_get_current_expansion(SSL *s); const char *SSL_COMP_get_name(const void *comp); void *SSL_COMP_get_compression_methods(void); int SSL_COMP_add_compression_method(int id,void *cm); #endif /* BEGIN ERROR CODES */ /* The following lines are auto generated by the script mkerr.pl. Any changes * made after this point may be overwritten when the script is next run. */ void ERR_load_SSL_strings(void); /* Error codes for the SSL functions. */ /* Function codes. */ #define SSL_F_CLIENT_CERTIFICATE 100 #define SSL_F_CLIENT_FINISHED 238 #define SSL_F_CLIENT_HELLO 101 #define SSL_F_CLIENT_MASTER_KEY 102 #define SSL_F_D2I_SSL_SESSION 103 #define SSL_F_DO_DTLS1_WRITE 1003 #define SSL_F_DO_SSL3_WRITE 104 #define SSL_F_DTLS1_ACCEPT 1004 #define SSL_F_DTLS1_BUFFER_RECORD 1005 #define SSL_F_DTLS1_CLIENT_HELLO 1006 #define SSL_F_DTLS1_CONNECT 1007 #define SSL_F_DTLS1_ENC 1008 #define SSL_F_DTLS1_GET_HELLO_VERIFY 1009 #define SSL_F_DTLS1_GET_MESSAGE 1010 #define SSL_F_DTLS1_GET_MESSAGE_FRAGMENT 1011 #define SSL_F_DTLS1_GET_RECORD 1012 #define SSL_F_DTLS1_OUTPUT_CERT_CHAIN 1013 #define SSL_F_DTLS1_PROCESS_OUT_OF_SEQ_MESSAGE 1014 #define SSL_F_DTLS1_PROCESS_RECORD 1015 #define SSL_F_DTLS1_READ_BYTES 1016 #define SSL_F_DTLS1_READ_FAILED 1001 #define SSL_F_DTLS1_SEND_CERTIFICATE_REQUEST 1017 #define SSL_F_DTLS1_SEND_CLIENT_CERTIFICATE 1018 #define SSL_F_DTLS1_SEND_CLIENT_KEY_EXCHANGE 1019 #define SSL_F_DTLS1_SEND_CLIENT_VERIFY 1020 #define SSL_F_DTLS1_SEND_HELLO_VERIFY_REQUEST 1002 #define SSL_F_DTLS1_SEND_SERVER_CERTIFICATE 1021 #define SSL_F_DTLS1_SEND_SERVER_HELLO 1022 #define SSL_F_DTLS1_SEND_SERVER_KEY_EXCHANGE 1023 #define SSL_F_DTLS1_WRITE_APP_DATA_BYTES 1024 #define SSL_F_GET_CLIENT_FINISHED 105 #define SSL_F_GET_CLIENT_HELLO 106 #define SSL_F_GET_CLIENT_MASTER_KEY 107 #define SSL_F_GET_SERVER_FINISHED 108 #define SSL_F_GET_SERVER_HELLO 109 #define SSL_F_GET_SERVER_VERIFY 110 #define SSL_F_I2D_SSL_SESSION 111 #define SSL_F_READ_N 112 #define SSL_F_REQUEST_CERTIFICATE 113 #define SSL_F_SERVER_FINISH 239 #define SSL_F_SERVER_HELLO 114 #define SSL_F_SERVER_VERIFY 240 #define SSL_F_SSL23_ACCEPT 115 #define SSL_F_SSL23_CLIENT_HELLO 116 #define SSL_F_SSL23_CONNECT 117 #define SSL_F_SSL23_GET_CLIENT_HELLO 118 #define SSL_F_SSL23_GET_SERVER_HELLO 119 #define SSL_F_SSL23_PEEK 237 #define SSL_F_SSL23_READ 120 #define SSL_F_SSL23_WRITE 121 #define SSL_F_SSL2_ACCEPT 122 #define SSL_F_SSL2_CONNECT 123 #define SSL_F_SSL2_ENC_INIT 124 #define SSL_F_SSL2_GENERATE_KEY_MATERIAL 241 #define SSL_F_SSL2_PEEK 234 #define SSL_F_SSL2_READ 125 #define SSL_F_SSL2_READ_INTERNAL 236 #define SSL_F_SSL2_SET_CERTIFICATE 126 #define SSL_F_SSL2_WRITE 127 #define SSL_F_SSL3_ACCEPT 128 #define SSL_F_SSL3_CALLBACK_CTRL 233 #define SSL_F_SSL3_CHANGE_CIPHER_STATE 129 #define SSL_F_SSL3_CHECK_CERT_AND_ALGORITHM 130 #define SSL_F_SSL3_CLIENT_HELLO 131 #define SSL_F_SSL3_CONNECT 132 #define SSL_F_SSL3_CTRL 213 #define SSL_F_SSL3_CTX_CTRL 133 #define SSL_F_SSL3_ENC 134 #define SSL_F_SSL3_GENERATE_KEY_BLOCK 238 #define SSL_F_SSL3_GET_CERTIFICATE_REQUEST 135 #define SSL_F_SSL3_GET_CERT_VERIFY 136 #define SSL_F_SSL3_GET_CLIENT_CERTIFICATE 137 #define SSL_F_SSL3_GET_CLIENT_HELLO 138 #define SSL_F_SSL3_GET_CLIENT_KEY_EXCHANGE 139 #define SSL_F_SSL3_GET_FINISHED 140 #define SSL_F_SSL3_GET_KEY_EXCHANGE 141 #define SSL_F_SSL3_GET_MESSAGE 142 #define SSL_F_SSL3_GET_RECORD 143 #define SSL_F_SSL3_GET_SERVER_CERTIFICATE 144 #define SSL_F_SSL3_GET_SERVER_DONE 145 #define SSL_F_SSL3_GET_SERVER_HELLO 146 #define SSL_F_SSL3_OUTPUT_CERT_CHAIN 147 #define SSL_F_SSL3_PEEK 235 #define SSL_F_SSL3_READ_BYTES 148 #define SSL_F_SSL3_READ_N 149 #define SSL_F_SSL3_SEND_CERTIFICATE_REQUEST 150 #define SSL_F_SSL3_SEND_CLIENT_CERTIFICATE 151 #define SSL_F_SSL3_SEND_CLIENT_KEY_EXCHANGE 152 #define SSL_F_SSL3_SEND_CLIENT_VERIFY 153 #define SSL_F_SSL3_SEND_SERVER_CERTIFICATE 154 #define SSL_F_SSL3_SEND_SERVER_HELLO 242 #define SSL_F_SSL3_SEND_SERVER_KEY_EXCHANGE 155 #define SSL_F_SSL3_SETUP_BUFFERS 156 #define SSL_F_SSL3_SETUP_KEY_BLOCK 157 #define SSL_F_SSL3_WRITE_BYTES 158 #define SSL_F_SSL3_WRITE_PENDING 159 #define SSL_F_SSL_ADD_DIR_CERT_SUBJECTS_TO_STACK 215 #define SSL_F_SSL_ADD_FILE_CERT_SUBJECTS_TO_STACK 216 #define SSL_F_SSL_BAD_METHOD 160 #define SSL_F_SSL_BYTES_TO_CIPHER_LIST 161 #define SSL_F_SSL_CERT_DUP 221 #define SSL_F_SSL_CERT_INST 222 #define SSL_F_SSL_CERT_INSTANTIATE 214 #define SSL_F_SSL_CERT_NEW 162 #define SSL_F_SSL_CHECK_PRIVATE_KEY 163 #define SSL_F_SSL_CIPHER_PROCESS_RULESTR 230 #define SSL_F_SSL_CIPHER_STRENGTH_SORT 231 #define SSL_F_SSL_CLEAR 164 #define SSL_F_SSL_COMP_ADD_COMPRESSION_METHOD 165 #define SSL_F_SSL_CREATE_CIPHER_LIST 166 #define SSL_F_SSL_CTRL 232 #define SSL_F_SSL_CTX_CHECK_PRIVATE_KEY 168 #define SSL_F_SSL_CTX_NEW 169 #define SSL_F_SSL_CTX_SET_CIPHER_LIST 1026 #define SSL_F_SSL_CTX_SET_PURPOSE 226 #define SSL_F_SSL_CTX_SET_SESSION_ID_CONTEXT 219 #define SSL_F_SSL_CTX_SET_SSL_VERSION 170 #define SSL_F_SSL_CTX_SET_TRUST 229 #define SSL_F_SSL_CTX_USE_CERTIFICATE 171 #define SSL_F_SSL_CTX_USE_CERTIFICATE_ASN1 172 #define SSL_F_SSL_CTX_USE_CERTIFICATE_CHAIN_FILE 220 #define SSL_F_SSL_CTX_USE_CERTIFICATE_FILE 173 #define SSL_F_SSL_CTX_USE_PRIVATEKEY 174 #define SSL_F_SSL_CTX_USE_PRIVATEKEY_ASN1 175 #define SSL_F_SSL_CTX_USE_PRIVATEKEY_FILE 176 #define SSL_F_SSL_CTX_USE_RSAPRIVATEKEY 177 #define SSL_F_SSL_CTX_USE_RSAPRIVATEKEY_ASN1 178 #define SSL_F_SSL_CTX_USE_RSAPRIVATEKEY_FILE 179 #define SSL_F_SSL_DO_HANDSHAKE 180 #define SSL_F_SSL_GET_NEW_SESSION 181 #define SSL_F_SSL_GET_PREV_SESSION 217 #define SSL_F_SSL_GET_SERVER_SEND_CERT 182 #define SSL_F_SSL_GET_SIGN_PKEY 183 #define SSL_F_SSL_INIT_WBIO_BUFFER 184 #define SSL_F_SSL_LOAD_CLIENT_CA_FILE 185 #define SSL_F_SSL_NEW 186 #define SSL_F_SSL_PEEK 1025 #define SSL_F_SSL_READ 223 #define SSL_F_SSL_RSA_PRIVATE_DECRYPT 187 #define SSL_F_SSL_RSA_PUBLIC_ENCRYPT 188 #define SSL_F_SSL_SESSION_NEW 189 #define SSL_F_SSL_SESSION_PRINT_FP 190 #define SSL_F_SSL_SESS_CERT_NEW 225 #define SSL_F_SSL_SET_CERT 191 #define SSL_F_SSL_SET_CIPHER_LIST 1027 #define SSL_F_SSL_SET_FD 192 #define SSL_F_SSL_SET_PKEY 193 #define SSL_F_SSL_SET_PURPOSE 227 #define SSL_F_SSL_SET_RFD 194 #define SSL_F_SSL_SET_SESSION 195 #define SSL_F_SSL_SET_SESSION_ID_CONTEXT 218 #define SSL_F_SSL_SET_TRUST 228 #define SSL_F_SSL_SET_WFD 196 #define SSL_F_SSL_SHUTDOWN 224 #define SSL_F_SSL_UNDEFINED_CONST_FUNCTION 243 #define SSL_F_SSL_UNDEFINED_FUNCTION 197 #define SSL_F_SSL_UNDEFINED_VOID_FUNCTION 244 #define SSL_F_SSL_USE_CERTIFICATE 198 #define SSL_F_SSL_USE_CERTIFICATE_ASN1 199 #define SSL_F_SSL_USE_CERTIFICATE_FILE 200 #define SSL_F_SSL_USE_PRIVATEKEY 201 #define SSL_F_SSL_USE_PRIVATEKEY_ASN1 202 #define SSL_F_SSL_USE_PRIVATEKEY_FILE 203 #define SSL_F_SSL_USE_RSAPRIVATEKEY 204 #define SSL_F_SSL_USE_RSAPRIVATEKEY_ASN1 205 #define SSL_F_SSL_USE_RSAPRIVATEKEY_FILE 206 #define SSL_F_SSL_VERIFY_CERT_CHAIN 207 #define SSL_F_SSL_WRITE 208 #define SSL_F_TLS1_CHANGE_CIPHER_STATE 209 #define SSL_F_TLS1_ENC 210 #define SSL_F_TLS1_SETUP_KEY_BLOCK 211 #define SSL_F_WRITE_PENDING 212 /* Reason codes. */ #define SSL_R_APP_DATA_IN_HANDSHAKE 100 #define SSL_R_ATTEMPT_TO_REUSE_SESSION_IN_DIFFERENT_CONTEXT 272 #define SSL_R_BAD_ALERT_RECORD 101 #define SSL_R_BAD_AUTHENTICATION_TYPE 102 #define SSL_R_BAD_CHANGE_CIPHER_SPEC 103 #define SSL_R_BAD_CHECKSUM 104 #define SSL_R_BAD_DATA_RETURNED_BY_CALLBACK 106 #define SSL_R_BAD_DECOMPRESSION 107 #define SSL_R_BAD_DH_G_LENGTH 108 #define SSL_R_BAD_DH_PUB_KEY_LENGTH 109 #define SSL_R_BAD_DH_P_LENGTH 110 #define SSL_R_BAD_DIGEST_LENGTH 111 #define SSL_R_BAD_DSA_SIGNATURE 112 #define SSL_R_BAD_ECC_CERT 1117 #define SSL_R_BAD_ECDSA_SIGNATURE 1112 #define SSL_R_BAD_ECPOINT 1113 #define SSL_R_BAD_HELLO_REQUEST 105 #define SSL_R_BAD_LENGTH 271 #define SSL_R_BAD_MAC_DECODE 113 #define SSL_R_BAD_MESSAGE_TYPE 114 #define SSL_R_BAD_PACKET_LENGTH 115 #define SSL_R_BAD_PROTOCOL_VERSION_NUMBER 116 #define SSL_R_BAD_RESPONSE_ARGUMENT 117 #define SSL_R_BAD_RSA_DECRYPT 118 #define SSL_R_BAD_RSA_ENCRYPT 119 #define SSL_R_BAD_RSA_E_LENGTH 120 #define SSL_R_BAD_RSA_MODULUS_LENGTH 121 #define SSL_R_BAD_RSA_SIGNATURE 122 #define SSL_R_BAD_SIGNATURE 123 #define SSL_R_BAD_SSL_FILETYPE 124 #define SSL_R_BAD_SSL_SESSION_ID_LENGTH 125 #define SSL_R_BAD_STATE 126 #define SSL_R_BAD_WRITE_RETRY 127 #define SSL_R_BIO_NOT_SET 128 #define SSL_R_BLOCK_CIPHER_PAD_IS_WRONG 129 #define SSL_R_BN_LIB 130 #define SSL_R_CA_DN_LENGTH_MISMATCH 131 #define SSL_R_CA_DN_TOO_LONG 132 #define SSL_R_CCS_RECEIVED_EARLY 133 #define SSL_R_CERTIFICATE_VERIFY_FAILED 134 #define SSL_R_CERT_LENGTH_MISMATCH 135 #define SSL_R_CHALLENGE_IS_DIFFERENT 136 #define SSL_R_CIPHER_CODE_WRONG_LENGTH 137 #define SSL_R_CIPHER_OR_HASH_UNAVAILABLE 138 #define SSL_R_CIPHER_TABLE_SRC_ERROR 139 #define SSL_R_COMPRESSED_LENGTH_TOO_LONG 140 #define SSL_R_COMPRESSION_FAILURE 141 #define SSL_R_COMPRESSION_ID_NOT_WITHIN_PRIVATE_RANGE 1120 #define SSL_R_COMPRESSION_LIBRARY_ERROR 142 #define SSL_R_CONNECTION_ID_IS_DIFFERENT 143 #define SSL_R_CONNECTION_TYPE_NOT_SET 144 #define SSL_R_COOKIE_MISMATCH 2002 #define SSL_R_DATA_BETWEEN_CCS_AND_FINISHED 145 #define SSL_R_DATA_LENGTH_TOO_LONG 146 #define SSL_R_DECRYPTION_FAILED 147 #define SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC 1109 #define SSL_R_DH_PUBLIC_VALUE_LENGTH_IS_WRONG 148 #define SSL_R_DIGEST_CHECK_FAILED 149 #define SSL_R_DUPLICATE_COMPRESSION_ID 1121 #define SSL_R_ECGROUP_TOO_LARGE_FOR_CIPHER 1119 #define SSL_R_ENCRYPTED_LENGTH_TOO_LONG 150 #define SSL_R_ERROR_GENERATING_TMP_RSA_KEY 1092 #define SSL_R_ERROR_IN_RECEIVED_CIPHER_LIST 151 #define SSL_R_EXCESSIVE_MESSAGE_SIZE 152 #define SSL_R_EXTRA_DATA_IN_MESSAGE 153 #define SSL_R_GOT_A_FIN_BEFORE_A_CCS 154 #define SSL_R_HTTPS_PROXY_REQUEST 155 #define SSL_R_HTTP_REQUEST 156 #define SSL_R_ILLEGAL_PADDING 1110 #define SSL_R_INVALID_CHALLENGE_LENGTH 158 #define SSL_R_INVALID_COMMAND 280 #define SSL_R_INVALID_PURPOSE 278 #define SSL_R_INVALID_TRUST 279 #define SSL_R_KEY_ARG_TOO_LONG 1112 #define SSL_R_KRB5 1104 #define SSL_R_KRB5_C_CC_PRINC 1094 #define SSL_R_KRB5_C_GET_CRED 1095 #define SSL_R_KRB5_C_INIT 1096 #define SSL_R_KRB5_C_MK_REQ 1097 #define SSL_R_KRB5_S_BAD_TICKET 1098 #define SSL_R_KRB5_S_INIT 1099 #define SSL_R_KRB5_S_RD_REQ 1108 #define SSL_R_KRB5_S_TKT_EXPIRED 1105 #define SSL_R_KRB5_S_TKT_NYV 1106 #define SSL_R_KRB5_S_TKT_SKEW 1107 #define SSL_R_LENGTH_MISMATCH 159 #define SSL_R_LENGTH_TOO_SHORT 160 #define SSL_R_LIBRARY_BUG 274 #define SSL_R_LIBRARY_HAS_NO_CIPHERS 161 #define SSL_R_MASTER_KEY_TOO_LONG 1112 #define SSL_R_MESSAGE_TOO_LONG 1111 #define SSL_R_MISSING_DH_DSA_CERT 162 #define SSL_R_MISSING_DH_KEY 163 #define SSL_R_MISSING_DH_RSA_CERT 164 #define SSL_R_MISSING_DSA_SIGNING_CERT 165 #define SSL_R_MISSING_EXPORT_TMP_DH_KEY 166 #define SSL_R_MISSING_EXPORT_TMP_RSA_KEY 167 #define SSL_R_MISSING_RSA_CERTIFICATE 168 #define SSL_R_MISSING_RSA_ENCRYPTING_CERT 169 #define SSL_R_MISSING_RSA_SIGNING_CERT 170 #define SSL_R_MISSING_TMP_DH_KEY 171 #define SSL_R_MISSING_TMP_ECDH_KEY 1114 #define SSL_R_MISSING_TMP_RSA_KEY 172 #define SSL_R_MISSING_TMP_RSA_PKEY 173 #define SSL_R_MISSING_VERIFY_MESSAGE 174 #define SSL_R_NON_SSLV2_INITIAL_PACKET 175 #define SSL_R_NO_CERTIFICATES_RETURNED 176 #define SSL_R_NO_CERTIFICATE_ASSIGNED 177 #define SSL_R_NO_CERTIFICATE_RETURNED 178 #define SSL_R_NO_CERTIFICATE_SET 179 #define SSL_R_NO_CERTIFICATE_SPECIFIED 180 #define SSL_R_NO_CIPHERS_AVAILABLE 181 #define SSL_R_NO_CIPHERS_PASSED 182 #define SSL_R_NO_CIPHERS_SPECIFIED 183 #define SSL_R_NO_CIPHER_LIST 184 #define SSL_R_NO_CIPHER_MATCH 185 #define SSL_R_NO_CLIENT_CERT_RECEIVED 186 #define SSL_R_NO_COMPRESSION_SPECIFIED 187 #define SSL_R_NO_METHOD_SPECIFIED 188 #define SSL_R_NO_PRIVATEKEY 189 #define SSL_R_NO_PRIVATE_KEY_ASSIGNED 190 #define SSL_R_NO_PROTOCOLS_AVAILABLE 191 #define SSL_R_NO_PUBLICKEY 192 #define SSL_R_NO_SHARED_CIPHER 193 #define SSL_R_NO_VERIFY_CALLBACK 194 #define SSL_R_NULL_SSL_CTX 195 #define SSL_R_NULL_SSL_METHOD_PASSED 196 #define SSL_R_OLD_SESSION_CIPHER_NOT_RETURNED 197 #define SSL_R_PACKET_LENGTH_TOO_LONG 198 #define SSL_R_PATH_TOO_LONG 270 #define SSL_R_PEER_DID_NOT_RETURN_A_CERTIFICATE 199 #define SSL_R_PEER_ERROR 200 #define SSL_R_PEER_ERROR_CERTIFICATE 201 #define SSL_R_PEER_ERROR_NO_CERTIFICATE 202 #define SSL_R_PEER_ERROR_NO_CIPHER 203 #define SSL_R_PEER_ERROR_UNSUPPORTED_CERTIFICATE_TYPE 204 #define SSL_R_PRE_MAC_LENGTH_TOO_LONG 205 #define SSL_R_PROBLEMS_MAPPING_CIPHER_FUNCTIONS 206 #define SSL_R_PROTOCOL_IS_SHUTDOWN 207 #define SSL_R_PUBLIC_KEY_ENCRYPT_ERROR 208 #define SSL_R_PUBLIC_KEY_IS_NOT_RSA 209 #define SSL_R_PUBLIC_KEY_NOT_RSA 210 #define SSL_R_READ_BIO_NOT_SET 211 #define SSL_R_READ_TIMEOUT_EXPIRED 2001 #define SSL_R_READ_WRONG_PACKET_TYPE 212 #define SSL_R_RECORD_LENGTH_MISMATCH 213 #define SSL_R_RECORD_TOO_LARGE 214 #define SSL_R_RECORD_TOO_SMALL 1093 #define SSL_R_REQUIRED_CIPHER_MISSING 215 #define SSL_R_REUSE_CERT_LENGTH_NOT_ZERO 216 #define SSL_R_REUSE_CERT_TYPE_NOT_ZERO 217 #define SSL_R_REUSE_CIPHER_LIST_NOT_ZERO 218 #define SSL_R_SESSION_ID_CONTEXT_UNINITIALIZED 277 #define SSL_R_SHORT_READ 219 #define SSL_R_SIGNATURE_FOR_NON_SIGNING_CERTIFICATE 220 #define SSL_R_SSL23_DOING_SESSION_ID_REUSE 221 #define SSL_R_SSL2_CONNECTION_ID_TOO_LONG 1114 #define SSL_R_SSL3_SESSION_ID_TOO_LONG 1113 #define SSL_R_SSL3_SESSION_ID_TOO_SHORT 222 #define SSL_R_SSLV3_ALERT_BAD_CERTIFICATE 1042 #define SSL_R_SSLV3_ALERT_BAD_RECORD_MAC 1020 #define SSL_R_SSLV3_ALERT_CERTIFICATE_EXPIRED 1045 #define SSL_R_SSLV3_ALERT_CERTIFICATE_REVOKED 1044 #define SSL_R_SSLV3_ALERT_CERTIFICATE_UNKNOWN 1046 #define SSL_R_SSLV3_ALERT_DECOMPRESSION_FAILURE 1030 #define SSL_R_SSLV3_ALERT_HANDSHAKE_FAILURE 1040 #define SSL_R_SSLV3_ALERT_ILLEGAL_PARAMETER 1047 #define SSL_R_SSLV3_ALERT_NO_CERTIFICATE 1041 #define SSL_R_SSLV3_ALERT_PEER_ERROR_CERTIFICATE 223 #define SSL_R_SSLV3_ALERT_PEER_ERROR_NO_CERTIFICATE 224 #define SSL_R_SSLV3_ALERT_PEER_ERROR_NO_CIPHER 225 #define SSL_R_SSLV3_ALERT_PEER_ERROR_UNSUPPORTED_CERTIFICATE_TYPE 226 #define SSL_R_SSLV3_ALERT_UNEXPECTED_MESSAGE 1010 #define SSL_R_SSLV3_ALERT_UNKNOWN_REMOTE_ERROR_TYPE 227 #define SSL_R_SSLV3_ALERT_UNSUPPORTED_CERTIFICATE 1043 #define SSL_R_SSL_CTX_HAS_NO_DEFAULT_SSL_VERSION 228 #define SSL_R_SSL_HANDSHAKE_FAILURE 229 #define SSL_R_SSL_LIBRARY_HAS_NO_CIPHERS 230 #define SSL_R_SSL_SESSION_ID_CALLBACK_FAILED 1102 #define SSL_R_SSL_SESSION_ID_CONFLICT 1103 #define SSL_R_SSL_SESSION_ID_CONTEXT_TOO_LONG 273 #define SSL_R_SSL_SESSION_ID_HAS_BAD_LENGTH 1101 #define SSL_R_SSL_SESSION_ID_IS_DIFFERENT 231 #define SSL_R_TLSV1_ALERT_ACCESS_DENIED 1049 #define SSL_R_TLSV1_ALERT_DECODE_ERROR 1050 #define SSL_R_TLSV1_ALERT_DECRYPTION_FAILED 1021 #define SSL_R_TLSV1_ALERT_DECRYPT_ERROR 1051 #define SSL_R_TLSV1_ALERT_EXPORT_RESTRICTION 1060 #define SSL_R_TLSV1_ALERT_INSUFFICIENT_SECURITY 1071 #define SSL_R_TLSV1_ALERT_INTERNAL_ERROR 1080 #define SSL_R_TLSV1_ALERT_NO_RENEGOTIATION 1100 #define SSL_R_TLSV1_ALERT_PROTOCOL_VERSION 1070 #define SSL_R_TLSV1_ALERT_RECORD_OVERFLOW 1022 #define SSL_R_TLSV1_ALERT_UNKNOWN_CA 1048 #define SSL_R_TLSV1_ALERT_USER_CANCELLED 1090 #define SSL_R_TLS_CLIENT_CERT_REQ_WITH_ANON_CIPHER 232 #define SSL_R_TLS_PEER_DID_NOT_RESPOND_WITH_CERTIFICATE_LIST 233 #define SSL_R_TLS_RSA_ENCRYPTED_VALUE_LENGTH_IS_WRONG 234 #define SSL_R_TRIED_TO_USE_UNSUPPORTED_CIPHER 235 #define SSL_R_UNABLE_TO_DECODE_DH_CERTS 236 #define SSL_R_UNABLE_TO_DECODE_ECDH_CERTS 1115 #define SSL_R_UNABLE_TO_EXTRACT_PUBLIC_KEY 237 #define SSL_R_UNABLE_TO_FIND_DH_PARAMETERS 238 #define SSL_R_UNABLE_TO_FIND_ECDH_PARAMETERS 1116 #define SSL_R_UNABLE_TO_FIND_PUBLIC_KEY_PARAMETERS 239 #define SSL_R_UNABLE_TO_FIND_SSL_METHOD 240 #define SSL_R_UNABLE_TO_LOAD_SSL2_MD5_ROUTINES 241 #define SSL_R_UNABLE_TO_LOAD_SSL3_MD5_ROUTINES 242 #define SSL_R_UNABLE_TO_LOAD_SSL3_SHA1_ROUTINES 243 #define SSL_R_UNEXPECTED_MESSAGE 244 #define SSL_R_UNEXPECTED_RECORD 245 #define SSL_R_UNINITIALIZED 276 #define SSL_R_UNKNOWN_ALERT_TYPE 246 #define SSL_R_UNKNOWN_CERTIFICATE_TYPE 247 #define SSL_R_UNKNOWN_CIPHER_RETURNED 248 #define SSL_R_UNKNOWN_CIPHER_TYPE 249 #define SSL_R_UNKNOWN_KEY_EXCHANGE_TYPE 250 #define SSL_R_UNKNOWN_PKEY_TYPE 251 #define SSL_R_UNKNOWN_PROTOCOL 252 #define SSL_R_UNKNOWN_REMOTE_ERROR_TYPE 253 #define SSL_R_UNKNOWN_SSL_VERSION 254 #define SSL_R_UNKNOWN_STATE 255 #define SSL_R_UNSUPPORTED_CIPHER 256 #define SSL_R_UNSUPPORTED_COMPRESSION_ALGORITHM 257 #define SSL_R_UNSUPPORTED_ELLIPTIC_CURVE 1118 #define SSL_R_UNSUPPORTED_OPTION 1091 #define SSL_R_UNSUPPORTED_PROTOCOL 258 #define SSL_R_UNSUPPORTED_SSL_VERSION 259 #define SSL_R_WRITE_BIO_NOT_SET 260 #define SSL_R_WRONG_CIPHER_RETURNED 261 #define SSL_R_WRONG_MESSAGE_TYPE 262 #define SSL_R_WRONG_NUMBER_OF_KEY_BITS 263 #define SSL_R_WRONG_SIGNATURE_LENGTH 264 #define SSL_R_WRONG_SIGNATURE_SIZE 265 #define SSL_R_WRONG_SSL_VERSION 266 #define SSL_R_WRONG_VERSION_NUMBER 267 #define SSL_R_X509_LIB 268 #define SSL_R_X509_VERIFICATION_SETUP_PROBLEMS 269 #ifdef __cplusplus } #endif #endif